Site work and new construction of an educational facility in San Benito, Texas. Completed plans call for the construction of a 2,275-square-foot, one-story above grade educational facility.

Work includes New 1-story stand-alone addition. It will consist of CMU walls and wood framing roof structure. Exterior cladding is split face block to match existing buildings. The addition is approximately 2,275 sq. ft. Project includes Owner provided kitchen equipment to be installed by Contractor. TENTATIVE AWARD DATE: May 14, 2024. The District will not be held responsible for missing, lost or late mail. San Benito Consolidated Independent School District WILL NOT ACCEPT ANY FACSIMILE (FAX) ON SEALED BIDS. Question Deadline 04/10/2024 at 12:00 PM CT All questions regarding bid specifications must be addressed in writing SPOKE AND INTENT OF WORK: It is the intent of the San Benito Consolidated Independent School District (SBCISD) to Construct a Culinary Arts Building at Veterans Memorial Academy. ITEM DESCRIPTION: Bidders shall submit complete data on each item contained in the bid. Such data shall show and identify, by manufacture's number, (catalog) or other illustrations, the brand and model on which the bid is based and so marked as to be identified with the bid item. FAILURE TO SUBMIT THE ABOVE INFORMATION WITH SEALED BID WILL DISQUALIFY BID. DESCRIPTION OF REQUIREMENTS: The types of submittal requirements for specified in this section including shop drawings, product data, samples and miscellaneous work related Submittals. Individual submittal requirements are specified in applicable sections for each unit of work. Refer to other Division 1 sections and other contract documents for requirements of administrative Submittals. Definitions: Work related Submittals of this section are categorized for convenience as follows: Shop drawings include specially prepared technical data for this project including drawings, diagrams; performance curves data sheets schedules, templates, patterns, reports, calculations, instructions, measurements and similar information not in - standard printed form for general application to a range of similar projects. Product data includes standard printed information on manufactured products that has not been specially prepared for this project, other than the designation of selections from among available choices printed therein. Samples include both fabricated and un-fabricated physical examples of materials, products and units of work; both as complete units and as smaller portions of units of work; either for limited visual inspection or (where indicated) for more detailed testing and analysis. Mock ups are special forms of samples, which are too large or otherwise inconvenient for handling in the manner specified for transmittal of sample Submittals. Miscellaneous Submittals related directly to the work (non administrative) include warranties, maintenance agreements, workmanship bonds, project photographs, survey data and reports, physical work records quality testing and certification reports, copies of industry standards, record drawings, field measurement data, operating and maintenance manuals, overrun stock, and similar information, devices and materials applicable to the work and not processed as shop drawings, product data or samples.