Renovation of a residential development in Salt Lake City, Utah. Completed plans call for the renovation of a residential development.

Work items include: o o Contractor is responsible to compare Scope of work to the house and drawings and submit questions before bid opening. o Obtain building permit and engineering stamp for seismic retrofit. o Remove lower portion of the roof covering and decking from the roof to gain access to top of brick walls for the seismic roof to wall connection. o Install pins, bolts, framing anchors, blocking and straps as per engineering plans and details for the building permit. o Bracing of chimney(s), if applicable, per engineering plans and details for the building permit (1) o After final inspection is completed, install roof decking where removed. o Install new roof covering to match existing, as close as possible, along the perimeter of the home where removed for seismic retrofit. o Clean up and removal of all construction debris. o The Unreinforced Masonry/Wood gable walls will require additional seismic improvements not listed in the Scope of Work. (0) o The seismic improvement may include gable bracing attached to the Masonry/Wood gable. o If shear walls are needed to connect walls to roof, that is part of the roof to wall connection process. o At permitting, a stamped engineered drawing shall detail the seismic improvement procedure. All contractors participating in this project must have a Unique Entity ID (UEI) number and be registered on the federal System for Award Management (SAM) at sam.gov. For further information, contact SHYANN HUGOE at (385) 977-7962 Question Submission Close Date 4/1/2024 5:00 PM MDT