Renovation of a mixed-use development in Greater Sudbury, Ontario. Completed plans call for the renovation of a educational facility.

Reference Number 0000267238 1.Remove existing dry sprinkler system from attic space including piping, sprinkler heads draining points. Sprinkler piping to be removed up to the dry sprinkler valves (4" & 6") in mechanical room - level 100. Existing piping supports/hangers to remain. 2.Disconnect and remove dry sprinkler system air compressor and turn it back to owner. 3. Install new dry sprinkler system, piping, sprinkler heads, draining points (via other space). Existing hangers/pipe supports to be reused. The main lines 6", 4", 3" sizes (schedule 40) supports to be re-checked with structural engineer and certified, modify as required (some additional may be installed. All to be coordinated by sprinkler contractor and pay all cost. Dry sprinkler system to be design by flow calculation, and certified by sprinkler P. Eng. 4. The tender set sprinkler drawings are provided for purpose of system pricing based on current system installation as built drawings (piping sizing, sprinkler heads type and location) 5. Provide new nitrogen generator package and install to the existing dry sprinkler valve. 6. Provide 2 nitrogen purge valve assembly and install to the existing system. 7. Wire nitrogen generator and 2 purge valve to the existing electrical panel. 8. All installation to be done in compliance with NFPA - 13. 9. Construction/installation of new/removals of old sprinkler system of existing building Addition 2013 to be prices as a separate price (including in the base tender bid) Official bid documents must be obtained from www.merx.com