Site work for a water / sewer project in Porterville, California. Completed plans call for site work for a water / sewer project.

Added 18 April 2024 Amendment 0001 Site vist: 25 Apr 2024 at 10:00 AM. Contractors must be US citizens with valid ID. All will meet at the operations office Address 29330 Hwy 190 Porterville, CA 93257. POC is Charlie Mauldin who will convoy to the dam and show them the elevator. Richard R. Schafer Dam Elevator Upgrade The Government anticipates issuing a Request for Quote (RFQ) with the intent of awarding a Firm-Fixed Price purchase order for Schafter Dam Elevator Upgrade service. Project Description: This project for service to upgrade and modernize tower elevators including updating all electrical, processors, cables, motors lighting and become current with ASME A17.1. at Richard L. Schafer Dam. All questions for this solicitation must be submitted in writing, via email, to the POC's listed below. All questions must be submitted 10 days prior to the quote due date. Wednesday, April 30, 2024 at 11:00AM is the cut off for questions to be accepted. No additional questions will be accepted after this date. All questions for this solicitation must be submitted in writing, via email, to o'laine.t.martinez@usace.army.mil, raymond.r.greenheck@usace.army.mil Location: The work required under this Performance Work Statement (PWS) provides for all materials, labor, transportation, and equipment necessary to upgrade and modernize the elevator at Richard L. Schafer Dam. R.L. Schafer Dam is in Tulare County, California approximately eight miles east of Porterville, Ca. This PWS will include updating the elevators to current ASME A17.1, updating electrical, processors, cables, motors, and lighting. The Contractor will furnish all labor, tools, and safety documents necessary to complete the repairs, safety tests, and bring elevator back to full servic Work to be Performed: Richard L. Schafer Dam 8. General Information: Contractor shall provide all materials, labor, transportation, and equipment necessary to upgrade and modernize the elevator at Richard L. Schafer Dam. This will include updating the elevators to current ASME A17.1, updating electrical, processors, cables, motors, and lighting. 8.1 The Contractor shall furnish all labor, equipment, transportation, and supervision necessary for the tower elevator upgrade and modernization at Richard L. Schafer Dam. 1. Removal and offsite disposal of all existing elevator components 2. Replace controllers with non-proprietary solid-state electronics with owner's manual provided to USACE, Richard L. Schafer Dam. 3. Replace the Elevator Hoist Motor, seismic switch and all necessary parts and expertise including any engineering required. 4. Engineering and drawings shall be provided. 5. Provide a custom-built elevator motor to include a gearbox, brake, rope gripper and all new wiring. 6. Update with new signage in the Machine room to meet ASAME A17.1 and all state and local codes. 7. Install and replace with new power elevator car and equipment to include new car, electrical components, operators control panel, LED lighting, door operator, door tracks, door, hoistway doors, hoistway tracks, hoistway door interlock mechanism, door gibs, door roller, and car door detectors. 8. Re-wire elevator shaft fixtures and all existing lighting will be replaced with LED fixtures. 9. Install new cellular ADA phone to be built into the Car fixture with any additional cabling, and antenna to be fully function with current cellular signal in the area. Contractor shall provide one year of service on the cellular service. The existingphone and phone line is to be retained. 10. Install and replace traveling cables, positioning door device, top of car door inspection station, car top stop switch, pit switch GFI outlet in pit, rail joint plates and limit switches. 11. Install and replace overspeed governor, governor tail sheave, governor rope, car safeties, hoist cables, hatch wiring, positioning door device, top of car door inspection station, car top stop switch, and pit switches. 12. Provide and install an addressable recall system and fire alarm system to include fire panels, cellphone communicator, heat detectors on all four floors, all necessary relays, 110VAC power disconnect, remove, and reinstall wiring and conduit, waterproof junction boxes, pull wiring and splits, new circuits, Myer hubs, terminate wire with Polaris connection, all lighting circuits function properly and test. 13. Clean and paint buffer and pit steel after the service and upgrade is complete. 14. Replace all current station panels with new car station panels. 15. Complete testing and required certification for a compliant and operational elevator