Site work and paving for a civil project in Birmingham, Alabama. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

The Work consists of, but is not limited to, the installation of approximately 3,340' of 16" DICL "Zinc Coated" pipe (non-restrained); 3,900' of 12" DICL "Zinc Coated" pipe (non-restrained); 4,280' of 8" DICL "Zinc Coated" pipe (non-restrained); 1,220' of 16" HDPE pipe (carrier pipe) at creek crossing [Bone Dry Road]; 900' of 18" HDPE pipe (carrier pipe) at creek crossing [Highway 79]; and other miscellaneous associated items as necessary to complete the Work along Highway 79 (Bethel Road to Maple Crest Lane), Bethel Road, and Bone Dry Road, located in unincorporated Jefferson County, Alabama, and the installation of approximately 3,620' of 16" DICL "Zinc Coated" pipe (non-restrained); 40' of 8" DICL "Zinc Coated" pipe (non-restrained); and other miscellaneous associated items as necessary to complete the Work along Highway 79 (Maple Crest Lane to Kiowa Road) and Kiowa Road located in unincorporated Blount County, Alabama. Bids will NOT BE ACCEPTED from any Prospective Bidder who does not attend the Pre-Bid Conference. All Prospective Bidders shall complete and submit the HUB Bid Solicitation Notice (HUB Form 3) by close of business on the date after the Pre-Bid Conference (no exceptions) to BCIA representatives listed on form and copy OWNER'S representatives due to the Pre-Bid being in the afternoon instead of the morning. HUB Program Acknowledgement (HUB Form 1), HUB Compliance Form (HUB Form 2), HUB Bid Solicitation Notice (HUB Form 3) w/ BCIA's acknowledgement, HUB Subcontractor Performance Form (HUB Form 5) and HUB Subcontractor Utilization Form (HUB Form 6) of Section 00451 HUB Program must be submitted at the Bid Opening as shown above. Specification Section 00451 HUB Program lists other resources for identifying HUB participants in addition to the BCIA. Each Bid shall be accompanied by a certified check or Bid Bond in the amount of five percent (5%) of the bid not to exceed $10,000.00 in the form and subject to conditions provided for in Section 00435, Bid Bond. The Successful Bidder will be required to furnish a Performance Bond and a Labor & Material Payment Bond each in an amount equal to one hundred percent (100%) of the Contract Award. Bidders shall comply with all statutory requirements in accordance with the Instruction to Bidders. Bids will only be received from CONTRACTORS who are licensed by the State of Alabama. The OWNER reserves the right to reject any and all proposals, the right to waive irregularities or to accept any proposal deemed to be in the best interest of the OWNER.