Site work and paving for a road / highway in Norwich, New York. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Additional Doc Acq Note: All copies of the Contract Documents, including Advertisement For Bids, Information For Bidders, Labor and Employment, Additional Instructions, Bid Documents, Agreement, General Conditions, General Requirements, Specifications, Contract Drawings and any Addenda, may be examined at no expense online. Contract Documents, including Advertisement For Bids, Information For Bidders, Labor and Employment, Additional Instructions, Bid Documents, Agreement, General Conditions, General Requirements, Specifications, Contract Drawings and any Addenda, may be examined at no expense on line at the following website, or at the office of Delaware Engineering D.P.C., 55 South Main Street, Oneonta NY, 13820 or at the City Clerk's Office, One City Plaza, Norwich, New York 13815 on or after March 28th 2024 Technical questions are to be directed to Derrick Wilcox, at Delaware Engineering, D.P.C.'s Oneonta office; 55 South Main Street, Oneonta NY 13820, Phone: (607) 432-8073 Fax: (607) 432 0432, Email: derrick@delawareengineering.com . Technical questions are to be directed to Derrick Wilcox, P.E. of Delaware Engineering, D.P.C., 55 South Main Street, Oneonta, NY 13820 - [607] 432-8073 [phone] and [607] 432-0432 [FAX]. All work shall be completed between August 1, 2024 and August 31, 2024. The City of Norwich would also like to note that if the CHIPS program is cut or reduced by the State of New York, that quantities and/or portions of the project will also be reduced in order to stay within the allotted funds received by the City of Norwich. In summary, the work includes, but is not limited to: STREETS AS OUTLINED ON CITY MAP: Note that part of the work under this project will be funded by the CHIPS/Pave NY/EWR program. The streets to be funded by this program are listed below as base bid and bid alternate work. BASE BID WORK: CHIPS/Pave NY/EWR FUNDED STREETS : 1. 2. 3. 4. American Avenue - (Broad Street to 100 ft East) --- (Approximate total of 2,200 sq. ft. of milling and 31 tons of new HMA) Beebe Avenue - (Elm Street to Broad Street) --- (Approximate total of 18,586 sq. ft. of milling and 260 tons of new HMA) Birdsall Street (Hale Street to Brown Avenue) --- (Approximate total of 33,000 sq. ft. of milling and 462 tons of new HMA) Borden Avenue - (Dead End to Silver Street) --- (Approximate total of 17,741 sq. ft. of milling and 248 tons of new HMA) 5. 6. 7. 8. 9. Borden Avenue - (Silver Street to RR) --- (Approximate total of 20,592 sq. ft. of milling and 288 tons of new HMA) Borden Avenue - (RR to Broad Street) --- (Approximate total of 53,222 sq. ft. of milling and 745 tons of new HMA) Chenango Avenue - (Entire Street) --- (Approximate total of 12,672 sq. ft. of milling and 177 tons of new HMA) Chirlin Drive - (Entire Street) --- (Approximate total of 25,344 sq. ft. of milling and 355 tons of new HMA) Cole Drive - (Entire Street) --- (Approximate total of 26,611 sq. ft. of milling and 373 tons of new HMA) 10. Coomes Street - (Entire Street) --- (Approximate total of 17,741 sq. ft. of milling and 248 tons of new HMA) 11. Davis Street - (Entire Street) --- (Approximate total of 3,432 sq. ft. of milling and 48 tons of new HMA) 12. Francis Avenue - (Elm Street to South Broad Street) --- (Approximate total of 21,120 sq. ft. of milling and 296 tons of new HMA) 13. Hale Street - (S. Broad Street to Birdsall Street) --- (Approximate total of 44,352 sq. ft. of milling and 621 tons of new HMA) 14. Hale Street - (Birdsall Street to City Line) --- (Approximate total of 24,710 sq. ft. of milling and 346 tons of new HMA) 15. Magistro Drive - (Entire Street) --- (Approximate total of 20,592 sq. ft. of milling and 288 tons of new HMA) 16. Morse Avenue - (Entire Street) --- (Approximate total of 12,672 sq. ft. of milling and 177 tons of new HMA) 17. Northrup Avenue - (Entire Street) --- (Approximate total of 25,560 sq. ft. of milling and 358 tons of new HMA) 18. Oleandorf Place - (Entire Street) --- (Approximate total of 6,653 sq. ft. of milling and 93 tons of new HMA) 19. York Street - (Entire Street) --- (Approximate total of 10,560 sq. ft. of milling and 148 tons of new HMA) **Note: Contractor shall coordinate and obtain any required permits with the NYSDOT for all work in DOT Right of Ways. Contractor shall coordinate and obtain any required permits with Chenango County Highway Department for all work in Chenango County Right of Ways. BID ALTERNATE WORK: Bid Alternate work that will be completed only if the City of Norwich is able to fund the work. BID ALTERNATE STREETS : 1. Canal Street - (Entire Street) --- (Approximate total of 9,715 sq. ft. of milling and 136 tons of new HMA) 2. Millings - (Credit for Contractor to Remove and Take All Millings Generated from the Project. Temporary Storage allowed at Borden Ave. Facility unit August, 31, 2024) --- (Approximate total of 407,075 sq. ft. of millings) **Note: All Work shall be scheduled to be completed between August 1, 2024 and August 31, 2024. The bidder(s), and /or significant subcontractor(s) shall have the requisite experience to perform the project work. Bidder(s) and subcontractor(s) shall provide a list a minimum of five (5) similar projects on-going and/or completed over the last ten (10) years with their bid. Those bidders lacking adequate experience will be deemed non-responsive and are encouraged to not submit a bid.