Site work and paving for a mixed-use development in Richmond, Virginia. Completed plans call for site work for a road / highway; for paving for a sidewalk / parking lot; road / highway; and sidewalk / parking lot.

The City of Richmond is accepting bids for the construction of the 2 Inch Mill and Overlay Paving project to provide general contracting services that include, but are not limited to, performing a citywide 2"inch mill and overlay paving program. This work will include up to a 2" inch milling and overlay with 2" inches of VDOT approved SM-12.5D with a minimum Asphalt Content of 5.8% and with 2.1 ounces of Aramid Fibers in some Mixes, including utility adjustments, sweep cleaning and all necessary preparation and finish work including but are not limited to patching, restoration (when needed), sidewalk repair, handicap ramps, pavement marking, etc. Contracts will be awarded based on funding being appropriated by the City's approved 2025 Budget. The Contractor can reserve the right to an increase based on VDOT's Fuel and asphalt price adjustment indices at time of renewal. The contractor will be compensated for Mobilization and Traffic control based on the total square yard of work performed by contractor. 1) award multiple contracts to insure the availability of contractors to perform the work in a timely manner; 2) divide the work into approximately 2 or 3 roughly equal sized projects assigned on the basis of need, conflicting concurrent work in the assigned area and other factors. This project has not been prequalified under the Code of the City of Richmond, Section 21-46. All interested bidders are encouraged to participate.