Renovation of an educational facility in Minneapolis, Minnesota. Completed plans call for the renovation of a 786-square-foot educational facility.

** As of August 01, 2025, project was awarded to Terra Construction, with no awarded amount ** Construction Services for build-out of Room 320 in Tate Hall, located on the east bank of the Twin Cities campus. Refer to the Request for Proposal documents (found in the Attachments tab) for full project details/requirements. Respondents are prohibited from contacting the identified department about this RFP while in process. Before submitting questions about the RFP via the Questions Tab, read and review the RFX INSTRUCTIONS, REQUIREMENTS, AND RIGHTS RESERVED BY THE UNIVERSITY DOCUMENT and ALL Attributes in the Attributes Tab. These provide valuable information and address frequently asked questions. Potential Respondents and/or Subcontractors are encouraged to register themselves on the Supplier Matchmaking Google Form. Once registered, the list of interested Respondents / Subcontractors for this RFP can be viewed on the Supplier Matchmaking List. Note: None of the information on the Supplier Matchmaking List has been validated by the University. It is YOUR responsibility to reach out to the suppliers/contacts noted on the list and confirm their information prior to considering a potential partnership. You may also consider reaching out to the Office of Supplier Diversity. Remember to submit your response, including attachments, early to allow time to correct errors. The submission deadline is a hard close. The system will reject responses with errors and will NOT allow late submissions. Identification of Potential Selected Respondent June 13, 2025 Anticipated Authorization to Proceed June 20, 2025 The University requires the Project to be substantially complete by no later than December 31, 2025. The total construction budget for this Project is $700,000 (current dollars, no escalation). The existing 786 square foot room 320 of Tate Hall is currently an empty shell space with some electrical and data connections, general lighting, and a unit heater. Construction will include a room within the room to house specialty lab equipment, a fume hood, casework, and finishes as well as mechanical, plumbing, and electrical work to support the new function of the space. Refer to the attached RFP Documents describing the scope of Work for the Project. The Contract will be a based on a Lump Sum Cost and shall include all fee, bond, insurance, permit, layout, field verification, labor, equipment, materials, shop drawings, demolition, disposal, temporary facilities, protection of property, and cleanup required to complete the work item as shown on the drawings and specified in the project manual. A hazardous materials survey was completed. No hazardous materials are expected to be encountered during this Project. Busch Architects is the Architect/Engineer of Record for the Project Dunham Proj No: 0425935-003 Deadline for RFP Questions May 28, 2025 at Noon Questions regarding this RFx shall be submitted through the MBid sourcing tool