Site work, paving and renovation of a mixed-use development in Dawson Springs, Kentucky. Completed plans call for the renovation of a educational facility; for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

Provide a replacement walk in cooler/freezer for the existing exterior units. Also provide an additional stand-alone walk-in freezer on a new concrete slab. Additional earthwork and concrete sidewalk is to be included. The Work includes, but is not limited to, selective demolition, earthwork, termite control, lawns and grasses, cast-in-place concrete, thermoplastic membrane roofing, sheet metal flashing and trim, joint sealants, food service equipment and electrical and clean-up and removal of construction debris. The Project Name is "dawson Springs Independent Schools, Dawson Springs High School, Freezer Cooler Expansion", as Shown on Contract Documents Prepared by the Architect, Rbs Design Group, P.s.c., Owensboro, Kentucky. The Work includes, but is not limited to, selective demolition, earthwork, termite control, lawns and grasses, cast-in-place concrete, thermoplastic membrane roofing, sheet metal flashing and trim, joint sealants, food service equipment and electrical and clean-up and removal of construction debris. **Document Notes: Check covering deposit shall be made payable to the order of the Dawson Springs Ind Schools. All mailing charges (non-refundable), if required, are to be arranged in advance with, and paid directly to, Maco-Evansville Blue with a separate check. Electronic copies of the plans will be available and shall be arranged with, and paid for directly to, MacoEvansville Blue (non-refundable). Partial sets of documents are not available. Deposits will be refunded to contractors who submit a bona fide proposal to the Owner (directly or through a prime contractor) and return the documents, in an acceptable and reusable condition within ten days of the opening of the bids. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.