Site work and new construction of a pre-engineered storage facility in Rochester, Minnesota. Completed plans call for the construction of a pre-engineered storage facility; and for site work for a pre-engineered storage facility.

All General, Civil, Mechanical, and Electrical Construction necessary and reasonably incidental for a new storage building with concrete floor, loading dock, steel framing, metal siding, and a metal roof. All racking that will be installed will be "by owner" after construction is complete, and will not be part of the scope of this project. B. Work shall be complete, including all appurtenances as shown on Project Drawings and Specified in Project Manual. Labor, materials, articles, equipment, transportation, services and the like shall be provided in such quantities as necessary to complete the Project. Singular specifications shall be considered plural where they apply. C. Work embraced by the Contract Documents shall be constructed under a Prime General Contract and shall include all General, Civil, Mechanical and Electrical Construction. new warehouse building with loading dock for the olmsted county waste to energy facility. Project will be awarded on June 18, 2024, and notice to proceed on or before June 25, 2024. Project is targeted for completion by January 1, 2025. Question Deadline 05/21/2024 at 11:00 AM CT Protests shall be sent electronically to the Purchasing Manager. Questions shall appear on the website as submitted. Contractor to install new bucket AB catalog number 2193FZ-CKC-44TJML-79UT to MCC TBD.a Contractor to confirm the location and proper part numbers. x Install (3) 3/O wires and (1) #6 from the bucket to new 277/480 panel board in new cold storage building. x Insall the (3) 3/0 wires and (1) #6 wire in 2" HDPE to be bored underground to not disturb the parking lot. x Install (1) 1.25" HDPE to be bored unground though the parking lot from existing building to new cold storage building. Install 12X12X4 outdoor rated box on plant side of building x Install and procure new 277/480 panel part number ETN PRL2X3225X30A with surface mount box and cover to location shown on drawings. Included (1) 3P 60A (1) 3P 30A (3)1P 20A (1) 3P 50A breakers x Install and procure 45KVA transformer part number _SG3A0045KB suspended from ceiling or a strut rack from floor. x Install and procure 120/208 panel part number _ETN PRL1X3225X30A with surface mount box and cover with (10) 1P 20A (1) 2P 50A breakers x All conduit to be EMT except inside the plant to be Rigid steel Conduit. x All wire to be THHN stranded x Mount all Light fixtures per manufactures details. x Procure and install (15) high bay light spart number Metalux UHBS-2436-MVL84050-U. Suspend using manufactures recommendations. x Install 9 Metalux UHBS-Sensor PK on 9 of the High bay fixtures x Install 8 Wall pack light fixtures part number ATLAS WLMS3-9L x Install 3 Surelite exit emergency combo above service door's part number APCH7R x Light fixtures to be plugged into receptable style. 277V lighting x Provide alternate cost to add 3 RAB SHARK 4FT General Washdown Linear Fixture x Any conduits coming out the concrete to be Rigid Steel Conduit. x All circuits to have continuous ground wires. x Install per drawings that are issued. Exact locations to be coordinated with owner. Location- 301 Energy Pkwy NE Rochester, MN 55906 HGA NO= 4103-012-00