Renovation of a service station / car wash facility in Salt Lake City, Utah. Completed plans call for the renovation of a service station / car wash facility.

ONLY FIRMS PRE-QUALIFIED DURING STAGE I OF THE RFS ARE ALLOWED TO BID ON THIS PROJECT The State of Utah - Division of Facilities Construction and Management (DFCM) is requesting bids for the construction of the following project: MTF WELDING EXHAUST, MUA & CONTROLS DEPARTMENT OF TRANSPORTATION SALT LAKE CITY, UTAH Project Description: Replace Existing MAU in the Welding shop, including additional ducting for AHU & Exhaust. Update BAS with Niagra N4 Controls. The bid documents will be available at 3:00 PM on Thursday, May 30, 2024 on the Utah Public Procurement Place (U3P) website and can also be accessed via the DFCM website - Electronic Bidding. . SCOPE A. Includes - 1. Furnish all labor, materials, and equipment necessary for the completion of the mechanical and plumbing scope of work. 2. Furnish and install all motors specified in this Division and be responsible for the proper operation of electrical powered equipment furnished by this Division. 3. Furnish exact location of electrical connections and information on motor controls to Division 26. 4. Mechanical Contractor shall obtain the services of independent Test and Balance Agency. 5. Placing the air conditioning, heating, ventilating, and exhaust systems into full operation and continuing their operation during each working day of testing and balancing. 6. Making changes in pulleys, belts, and dampers, or adding dampers, as required for the correct balance as recommended by Balancing Contractor at no additional cost to Owner. 7. Air balance, final adjustment and test run. 8. The satisfactory performance of the completed systems is a requirement of this specification. B. Related Work Specified Elsewhere 1. Conduit, line voltage wiring, outlets, and disconnect switches specified in Division 26. 2. Magnetic starters and thermal protective devices (heaters) not a factory mounted integral part of packaged equipment are specified in Division 26.