Renovation of a fire / police facility in Seabrook, New Hampshire. Completed plans call for the renovation of a fire / police facility.

As of August 28, 2024, this project has not yet been awarded. A timeline for the award has not yet been established. PROJECT DESCRIPTION The work performed by the Contractor shall be in a workman-like professional manner, in accordance with generally accepted industry principles and practices. Bidders shall be fully qualified with at least three (3) years of experience and must be CJIS certified. Bidders shall submit a statement of qualifications with their bid form. Each Proposal must include a list of at least three current references for whom comparable work has been performed. This list shall include the company name, person to contact, address, and telephone number. Preferred references include other local government agencies. SCOPE OF WORK This Proposal shall include the following services to be performed by the successful Contractor but are not necessarily all-encompassing: Demo Remove the metal partition, existing lockers, toilet, and sink, and remove all existing floor, wall, and shower tiles. Chip up the existing 6" curb under existing lockers. Prep for the New Tile Installation Scrape, chip, level, and fill all tile areas to prep for new tiles. Tile Supply and install the new floor tile. 12X12 to match the existing tile in the men's room. Supply and install new wall tile, floor to ceiling. 12X24 to match the existing tile in the men's room. Supply and install new shower floor tile. 2X2 to match the existing tile in the men's room. Supply and install a new metal Schluter cove base to match the base in the existing men's room. Ceiling Remove existing ceiling tiles and supply and install new tiles to match the existing men's room. Reuse existing metal grid. Exhaust Fan Supply and install a new exhaust fan and vent to the exterior. Plumbing Fixtures Re-install the existing toilet and sink. Replace sink faucet and shower trim. Metal Partition Paint and re-install the existing metal partition door wall. Supply and install new, wider end wall. Lockers Re-install lockers. Paint smaller lockers to match. Electrical Supply and install new 2' X 2' LED ceiling lights. Change existing switches to motion lights. Doors Change the exterior door; new door to have a 12X12 one-way glass pane. Cut in 12X12 one-way glass pane into the existing interior door. All questions shall be submitted in writing to only the Chief Procurement Officer at the above address by July 18th, 2024, at 2:00 pm EST. The Chief Procurement Officer will then forward the question and the Town's response to all prospective bidders. If it becomes necessary to revise any part of the RFP, addenda will be provided by email and on the Town website