Site work and asbestos abatement for a mixed-use development in Hanover, Massachusetts. Completed plans call for site work for a educational facility; and for asbestos abatement for a educational facility.

Requesting bids from responsible and responsive parties for the limited abatement of asbestos from the Sylvester School Building as directed by the Facilities Engineer. The work shall involve the removal and disposal of asbestos from the closed former school and current administrative offices at 495 Hanover St., Hanover, MA 02339. The estimated cost of the project is $75,000. Contractor Qualification DCAMM Certificate Required for DCAMM contracts over $150,000, Highway Division contracts over $50,000. Questions concerning this bid or its conditions may be addressed to the DPW Facilities Engineer at the address below: Andrew Cardinal Facilities Engineer 495 Hanover Street Hanover, MA 02339 Phone: 781-826-5189 Email: andrew.cardinal@hanover-ma.gov Contractor shall initiate work as soon as feasible following contract award; no later than August 31, 2024 and shall be completed no later than October 1, 2024 unless written approval is granted by the Department of Public Works. The intent of the Work includes removing and disposing asbestos-containing materials (ACMs) and non-asbestos related materials as outlined herein within the basement level at the former Sylvester School, 495 Hanover Street, Hanover, Massachusetts. The exact scope of abatement work and ACMs to be abated will be determined by the Owner (Awarding Authority). The Owner retains the option to remove only those ACMs impacted by the work. A. Base Bid: Complete the required Summary of Work outlined herein and as itemized in Table 1: 1. Remove and dispose of asbestos-containing materials (ACMs) and asbestos-containing waste material (ACWM) as asbestos waste. 2. ACMs to be removed include: a. Pipe insulation b. Pipe fitting insulation c. Stick pin glue daubs on fiberglass insulated metal ducting (complete duct demolition/disposal) d. Gaskets on/at metal duct hatches e. ACM dust/debris within hallway/fan room metal ducting (decontamination) (complete duct demolition/disposal of ducting and fan motor equipment) f. Repair of damaged pipe insulation remaining in work areas.