Site work and paving for a mixed-use development in Mancos, Colorado. Completed plans call for site work for a road / highway; sidewalk / parking lot; and for paving for a sidewalk / parking lot.

ROAD MAINTENANCE AND RECONDITIONING 1.1 DESCRIPTION OF WORK Maintain and recondition existing roads and parking areas. Rebuild and reshape the; traveled way, turnouts, shoulders, ditches, waterbars, and rolling dips. Clean culverts. PART 2 PRODUCTS Not Used. PART 3 EXECUTION 3.1 ROADWAY SHAPING AND GRADING 3.1.1 SCARIFY Prior to shaping, scarify the roadway to a depth greater than existing ruts, washboards, potholes, or other surface irregularities. 3.1.2 SHAPING AND GRADING Shape the roadway in a manner that will conserve usable material; usable material shall not be graded into ditches and/or over the shoulders of the road. Provide a cross slope that will drain water across the roadway. Maintain an inslope, outslope, or crown. 3.1.3 TURNOUTS AND INTERSECTIONS Turnouts shall be maintained to the same requirements as the roadway. Provide smooth transitions at all intersections. 3.1.4 SURFACED ROADS Establish a blading pattern that will retain the surfacing on the roadbed and provide a thorough mixing of the materials within the completed surface width. Surfacing material shall not be graded into ditches and/or over the shoulders of the road. 3.1.5 FINISHING Finish the road surface to be reasonably smooth, uniform, and shaped to conform to the typical sections as shown on the drawings. Remove from the road surface any rock larger than 3 inches in its greatest dimension. Vegetation and organic material larger than 12 inches in length, or larger than 12 inches in length, or larger than 2 inches in diameter, shall be removed from the roadway. Period of Performance: 09/03/2024 to 02/07/2025 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.