Site work and paving for a road / highway in Island Park, Idaho. Completed plans call for site work for a road / highway; and for paving for a road / highway.

https://govmarketnews.com/idaho-adds-four-treasure-valley-road-projects-to-1b-transportation-program/ The Idaho Transportation Department (ITD) has selected several roadway construction projects in Treasure Valley to receive additional funding from the state. The funding comes from House Bill 25, which was passed last year to provide an annual $20 million diversion for the next three years to the Transportation Expansion and Congestion Mitigation (TECM) program. The bill also enables the department to inject another $1 billion into the state transportation system as part of its Transportation Investment Program (TIP). The new allocation will allow the ITD to add four projects to the state’s draft TIP for design and construction. These projects include: Widening State Highway 16 from two to four lanes to increase capacity. The section from SH-44 to Beacon Light will also feature a median barrier and an overpass. Construction is slated to begin in 2027. Expanding road capacity along US-20/26 by adding two additional lanes in each direction between Middleton and Star. Additional work will install a continuous center turn lane. Construction is expected to begin in 2026. Widening SH-44 from three to five lanes from Star to SH-16. The project will include road resurfacing. Construction is anticipated to begin in 2027. Conducting an ongoing study prioritizing operational improvements for mobility along I-84. The fund established through HB 25 allows the state to support projects that address and mitigate congestion along the transportation network. Projects approved by the ITD and the Idaho Transportation Board must mitigate traffic times, improve traffic flow and mitigate traffic congestion. While the fund was recently established, the TECM Program has been in operation since 2017. The initiative helps accelerate critical improvements on corridors, enhancing the state transportation system’s safety and mobility. Since then, the TECM Program has supported essential modernization projects for Idaho’s transportation infrastructure, accelerating projects that would have otherwise taken decades to build. The TECM Program has already identified 11 projects to receive funding, alongside two additional corridors that are not currently receiving financial support. --------------------- The Contractor will provide all labor, materials, and equipment required to complete the milling and overlay as described in the contract documents. This includes, but is not limited to, personnel, milling equipment and milling, brooming, tack oil, application of tack oil, plant mix, laying of plant mix, compacting rollers, traffic control, temporary pavement markings and Mobilization. Question Deadline 06/12/2025 at 5:00 PM MT Prior to bid opening, submit any project-related questions through Online - Submit questions by 5:00pm MT on the Thursday prior to the bid opening. County: Fremont Guardrails/Attenuators/End Treatments, Fencing/Guardrails/Handrails Est. Value Notes: $500,000 to $1,000,000 Street/Road Asphalt Milling, Asphalt Overlay, Rehab. and/or Maint. For the work of Milling and Overlaying on US-20 between the MP 361 to MP 364 near Ashton, ID Please use the project's Q&A feature for any design-related questions IDOT: Call 3 - D6 FY26 Mill and Overlay Us-20 MP361 to MP364 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.