Renovation of a military facility in Hill Air Force Base, Utah. Completed plans call for the renovation of a military facility.

Minimal wiring is required for this requirement. It is not required to supply new wiring for the entire building, but some new wiring may be needed at each camera location. Replacement of security cameras (16), 16-channel network video recorder, display, and monitor, and all connecting cables and mounting hardware in building 849, Hill AFB. Any brand names stated in the SOW are not required. Any equivalent brand may also be acceptable as long as the same specifications are met. We will be hosting a site visit on August 15th, 2024 at 10:00 am for those that would like to attend. If interested in attending, please send the list of information below to Brevin Schade, brevin.schadeus.af.mil, 801-777-8957 and Shelly Bachison, shelly.bachisonus.af.mil, 801-586-8606. The information is required for security purposes in order to grant access to Hill Air Force Base. The information is due no later than Thursday, August 1st by noon mountain time. We will be submitting the list at that time and will not be able to accept late submissions. Required Information: 1. Name of visiting person as it appears on their drivers license 2. Drivers license number and state of issue 3. Date of birth of the visiting person The information is due no later than Thursday, August 1st by noon mountain tim DESCRIPTION OF SERVICES The OO-ALC at Hill AFB, UT has a requirement for the replacement of its Security Camera System (1) consisting of security cameras (16), 16-channel network video recorder, display, and monitor, and all connecting cables and mounting hardware. Work shall include design, installation, configuration, and testing of the new system. Security Camera System Components o CAT6, Thin Run, Ethernet Patch, Cable, 10ft, Black (Qty 16). o 16-ChannelNetworkVideoNVRRecorderwithPoE(Qty 1). o 820 Series 8MP Turret IP, Outdoor Camera, white (Qty 16). o PTZ Wall Mount Bracket Compatible with 420-IP-PTZ-25W Color matched construction & simplified wire management (Qty 2). o 55 inch direct-lit, commercial grade display (Qty 1). o TV Tilt Wall Mount for 36"-80" Displays (Qty 1). o HDMI Splitter - 1x4 (Qty 1). o 4K Ultra HD - HD Base T-Extender with IR, RS-232 (Qty 2). o CAT 6 Unshielded Cable Black (Qty 300 ft). o 4K M-M Pro HDMI Cable with Anti Slip 3.3 ft (Qty 1). o 4K M-M Pro HDMI Cable with Anti Slip 6.5 ft (Qty 6). o 21.5" Flat Panel Monitor (Qty 1). o System Installation (Qty 1). Security Camera Install and Test to Insure Functionality 1.2.1. Two (2) security cameras shall be installed on the breezeway ceiling at the east entrance of building 849. 14 security cameras shall be installed in the hallways inside of the building. All security cameras shall be hard-wire connected to the network video recorder and monitoring station which shall be installed in room A-01A (Operations Center). 1.2.2. The Contractor shall furnish all management, supervision, labor, technical, analytical services, equipment, material, transportation, and supplies required to install and configure the security camera system in and around Building 849 Hill AFB, Utah, in accordance with this SOW. The Contractor shall be responsible for providing and installing all miscellaneous ancillary hardware not explicitly specified in this SOW as required for a complete and fully operational system