Site work and new construction of a pre-engineered storage facility in Palmyra, Pennsylvania. Completed plans call for the construction of a 2,000-square-foot pre-engineered storage facility; and for site work for a pre-engineered storage facility.

8/8/24 - Amendment 0001 was posted to PIEE. Amendment 0001 is incorporated into SP3300-24-Q-5024 to correct the time zone from EST to EDT and to incorporate Attachment 2 Drawings. Updated Solicitation SP3300-24-Q-5024 and Amendment 0001 are attached. Construction Storage Building 259 at Defense Distribution Center Susquehanna (DDSP).Contractor to provide all necessary labor, material and/or equipment to perform all work associated with the following tasks, but is not intended to be limited to these tasks alone:1.Construct a 2,000 square foot pre-engineered metal building including installation of underground electric service to the building.2.Obtain the services of a professional engineer licensed in the State of Pennsylvania to design the buildings concrete slab, support footings, walls and roof structure. The design shall include anchoring the pre-engineered building to the footings. The design shall include seismic loading in accordance with UFC 3-310-04 Seismic Design for Buildings. The design drawings and structural calculations must include the professional engineers seal and signature. Submit the design as sealed and signed design drawings and structural calculations to the government for record purposes prior to commencement of work. 3.Installation of pole mounted transformer. All work shall be performed complete and in accordance with the specifications, drawings, and solicitation requirements. See Solicitation SP3300-24-5024 and associated attachments. For access to the drawings, send a request by electronic mail to the Acquisition Specialist, Melanie Morris, at Melanie.l.morrisdla.mil with the appropriate subject: SP3300-24-Q-5024 Drawing Request.