Site work for an educational facility in Waipahu, Hawaii. Completed plans call for site work for a educational facility.

Waipahu Elementary School - Installation of new outdoor rated digital signage. New Equipment a. New outdoor rated sign shall be a single sided information sign, full color LED b. Sign display dimension shall be at least 8' wide x 4' height c. Display resolution shall be 288 * 288 d. Pixels pitch shall be P6 e. Total pixels shall be 73,728 px f. Contractor shall provide all necessary software to program and run the LED digital display. g. Equipment shall be Daktronics, Steward Signs or Whitebox II. Sign Mounting a. The new LED digital signage marquee will be mounted behind Portable One along the driveway. This system will be in color, easily programmable from a computer remotely, UV protected and on a timer to dim at night so as not to disturb the neighbors (the exact location to be determined at the mandatory pre-bid meeting). b. Structural supports to be designed and installed per sign manufacturer's recommendation to accommodate all local and building codes . Toning shall be done for any trenching work. Any soils from trenching work must remain and be disbursed on site. All existing conditions shall be properly restored. c. The contractor shall provide all necessary components for the complete installation; including but not limited to EMT conduits, wiring, circuit breakers, outlets, mounting brackets, hardware, fasteners, cabling, etc. III. Painting a. All exposed conduits shall be painted to match surrounding areas. b. Any damages caused by the contractor's work shall be repaired and touch up painted to the satisfaction of the project coordinator. IV. Electrical a. Electrical work shall be for both power and communication. b. The power for the sign shall be run from Portable One's electrical panel. The contractor shall verify power requirements of the sign before ordering. Wiring shall be sized per local electrical code and the NEC Handbook. Panel shall be properly labeled for the new display. c. Contractor shall include grounding rods and an approved surge protection device at the panel to protect new equipment from electrical power surges. d. Contractor shall provide two (2) Category-6 OSP cables and pull string from the sign's ethernet port to the communication hub in Building F IDF. Question Deadline 09/25/2024 Question submitter name will not be displayed. Answers Due Date: 09/27/2024