Site work for a development in Branson, Missouri. Completed plans call for site work for a development.

Shepherd of the Hills Fish Hatchery Water Control Gate Replacement. Site Address: 483 Hatchery Road. Site Directions: From Branson, take Highway 165 southwest 6 miles to the hatchery near Table Rock Dam. The hatchery visitor center address is 483 Hatchery Road Branson, MO 65616. Description: The Contractor shall furnish all equipment, and incidentals required to install the stainless steel slide gates and appurtenances as shown on the Contract Drawings and as specified herein, ready for operation and field test. The gates and appurtenances shall be supplied in accordance with the latest edition of AWWA C561 Standard for Fabricated Stainless Steel Slide Gates as modified herein. The allowable leakage rate for the stainless-steel gates in this specification shall be no more than half the allowable leakage listed in the latest revision of AWWA C561. Gates shall be NSF/ANSI 61 certified. Provide manufacturer certification of conformance to this standard. Question Deadline 09/26/2024 No oral interpretations will be made to any bidder as to the meaning of the plans and specifications or the acceptability of alternate products, materials, form or type of construction. Every request for interpretation shall be made in writing and submitted with all supporting documents not less than seven (7) calendar days before opening of bids. Every interpretation made to a bidder will be in the form of an addendum and will be sent as promptly as is practicable to all persons to whom plans and specifications have been issued. All such addenda shall become part of the contract documents. The Contractor agrees to complete all work contemplated by this contract within 151 Days or on or before March 31 st , 2025 from the date of execution by the Owner. The Contractor shall furnish all equipment, and incidentals required to install the stainless steel slide gates and appurtenances as shown on the Contract Drawings and as specified herein, ready for operation and field test. The gates and appurtenances shall be supplied in accordance with the latest edition of AWWA C561 Standard for Fabricated Stainless Steel Slide Gates as modified herein. The allowable leakage rate for the stainless-steel gates in this specification shall be no more than half the allowable leakage listed in the latest revision of AWWA C561. Gates shall be NSF/ANSI 61 certified. Provide manufacturer certification of conformance to this standard.