Site work for a transportation facility in Savannah, Georgia. Completed plans call for site work for a transportation facility.

Project has been awarded but award amount not confirmed. The Savannah Hilton Head International Airport is a Part 139 Commercial Airport. The Savannah Airport Commission is responsible for the improvements, maintenance and operations of the movement and non-movement areas of the airport's ramps, taxiways, and runways at the Savannah Hilton Head International Airport. The primary runway is Runway 10/28, with a grooved concrete/asphalt surface. Runway 10/28 is 9,351 x 150 ft. The secondary runway, Runway 1/19 also consists of a grooved, concrete/asphalt surface. Runway 1/19 is 7,002 x 150 ft. Both runways are served by full-length parallel taxiway systems. o Per AC 150/5340-1M (Exhibit B) and the Airfield Marking Handbook, this project consists of removing rubber build up on the surface of Runway 10/28, approximately 200,000ft2, and repainting all markings on both runway 10/28, excluding runway edge lines, and runway 1/19, excluding runway edge lines. o This project will also include cleaning of all Taxiway edge markings as well as the removal of (2) obsolete "NO TAXI ISLANDS" and accompanying painted signage: 3,600ft2. The taxiway edge marking cleaning will cover 150,000ft2. o This project will also include the removal and repainting of all taxiway centerlines. There are approximately 82,500 ft2 of taxiway centerlines. There will also be 7,000ft2 removal and replacement of taxiway edge markings. All markings will need to be thoroughly cleaned before painting is applied, even if they are not a part of complete removal and replacement. o All paint will be approved TTP 1952f Type 2 waterborne paint with type 1 glass beads. Reflectorized White: 146,00ft2 Reflectorized Yellow: 49,500 ft2 Non-reflectorized Black: 104,000 ft2 o All work performed in association with this project will be completed during day and nighttime hours. The Savannah Airport Commission Reserves the Right: (a) to reject any or all RFQs or any part thereof; and (b) to waive any irregularities and/or technicalities on the RFQ; and (c) to accept the Vendor that is in the best interest of SAC; and (d) to obtain clarification or additional information; and (e) to purchase either selected items, or to not select any Vendor or purchase any goods and/or services resulting from this request; and (f) to reject any Vendor who has previously failed to perform properly or complete on time projects of a similar nature, or (g) to reject any Vendor whom an investigation shows Vendor is not in a position to performthe project and/or service as specified in this RFQ. (h) to cancel a Purchase Order (PO) and/or contract if the vendor fails to meet the obligations/agreement in the bid response (i.e., pricing, agreed timeframe of delivery).