Renovation of a detention facility in Folsom, California. Completed plans call for the renovation of a detention facility.

A-Yard building A-1/A-2 - ROOF ASSEMBLY - Complete roofing system, thermoplastic roofing membrane, adhered polyvinyl chloride (PVC), 80 mil., with factory applied felt backing, in 6' X 80' or 10' X 80' rolls, white exposed face color, to cover approximately 32,000 square feet roof. Bid must include all materials to be installed over a concrete deck. Lot to include, but is not limited to the following: Roofing membrane, membrane flashings, detail Membrane 24" X 50', G410 white strip 8" x 100' (67SF roll), roofing insulation, tapered insulation, foil face tapes, termination tapes, fasteners, anchors, termination bars, protection walk pads, pipe flashings, pre-primed barrier boards, stainless steel pipe clamps, pre-formed crickets and cant, and retro-fit roof drain insert extensions. All extruded polystyrene (XPS) insulation, XPS tapered insulation, vapor barrier retarder, gypsum sheathing and protection roof boards (primed and un-primed, all membrane for roof, wall, base, roof vents, flashings, mechanical curbs, sealants, caulks, fasteners, anchors and walk pads. ADHESIVES AND SEALANTS FOR ROOF AND WALLS: To be delivered upon request by IWL Construction Supervisor. (Quantity, unit price and product information of Adhesives and Sealants must be included on materials list.) The coverage rate for membrane adhesive shall be 100SF per gallon. The coverage for insulation adhesive must meet FM Global Property Loss Prevention Data Sheets (1-29 & 1-49) WARRANTY Manufacturer's, Standard Twenty (20) Year, Full System, No Dollar Limit Warranty, (labor/material warranty), warranty shall be non-prorated. (This language supersedes specification section 07-54-19.) NOTE: Warranty will not be paid until the roof is installed and is accepted by the manufacturer's representative. TECHNICAL ASSISTANCE, on-site inspection, testing, training and certification of IWL staff by roofing manufacturer's representative. ROOFING MATERIALS, TEN PERCENT (10%) of all roofing materials (including separate shipping fee) to be delivered only upon request of Construction Supervisor: (Quantity, unit price and product information of all items must be included on materials list.) B-Yard building B-3/B-4 - ROOF ASSEMBLY - Complete roofing system, thermoplastic roofing membrane, adhered polyvinyl chloride (PVC), 80 mil., with factory applied felt backing, in 6' X 80' or 10' X 80' rolls, white exposed face color, to cover approximately 32,000 square feet roof. Bid must include all materials to be installed over a concrete deck. Lot to include, but is not limited to the following: Roofing membrane, membrane flashings, detail Membrane 24" X 50', G410 white strip 8" x 100' (67SF roll), roofing insulation, tapered insulation, foil face tapes, termination tapes, fasteners, anchors, termination bars, protection walk pads, pipe flashings, pre-primed barrier boards, stainless steel pipe clamps, pre-formed crickets and cant, and retro-fit roof drain insert extensions. All extruded polystyrene (XPS) insulation, XPS tapered insulation, vapor barrier retarder, gypsum sheathing and protection roof boards (primed and un-primed, all membrane for roof, wall, base, roof vents, flashings, mechanical curbs, sealants, caulks, fasteners, anchors and walk pads. Bid per plans and specifications. A detailed materials list, including quantities, unit pricing and brand/model information, must be provided with bid. ADHESIVES AND SEALANTS FOR ROOF AND WALLS: To be delivered upon request by IWL Construction Supervisor. (Quantity, unit price and product information of Adhesives and Sealants must be included on materials list.) The coverage rate for membrane adhesive shall be 100SF per gallon. The coverage for insulation adhesive must meet FM Global Property Loss Prevention Data Sheets (1-29 & 1-49) WARRANTY Manufacturer's, Standard Twenty (20) Year, Full System, No Dollar Limit Warranty, (labor/material warranty), warranty shall be non-prorated. (This language supersedes specification section 07-54-19.) B-Yard building B-3/B-4 - ROOF ASSEMBLY - Complete roofing system, thermoplastic roofing membrane, adhered polyvinyl chloride (PVC), 80 mil., with factory applied felt backing, in 6' X 80' or 10' X 80' rolls, white exposed face color, to cover approximately 32,000 square feet roof. Bid must include all materials to be installed over a concrete deck. Lot to include, but is not limited to the following: Roofing membrane, membrane flashings, detail Membrane 24" X 50', G410 white strip 8" x 100' (67SF roll), roofing insulation, tapered insulation, foil face tapes, termination tapes, fasteners, anchors, termination bars, protection walk pads, pipe flashings, pre-primed barrier boards, stainless steel pipe clamps, pre-formed crickets and cant, and retro-fit roof drain insert extensions. All extruded polystyrene (XPS) insulation, XPS tapered insulation, vapor barrier retarder, gypsum sheathing and protection roof boards (primed and un-primed, all membrane for roof, wall, base, roof vents, flashings, mechanical curbs, sealants, caulks, fasteners, anchors and walk pads. Bid per plans and specifications. A detailed materials list, including quantities, unit pricing and brand/model information, must be provided with bid. ADHESIVES AND SEALANTS FOR ROOF AND WALLS: To be delivered upon request by IWL Construction Supervisor. (Quantity, unit price and product information of Adhesives and Sealants must be included on materials list.) The coverage rate for membrane adhesive shall be 100SF per gallon. The coverage for insulation adhesive must meet FM Global Property Loss Prevention Data Sheets (1-29 & 1-49) WARRANTY Manufacturer's, Standard Twenty (20) Year, Full System, No Dollar Limit Warranty, (labor/material warranty), warranty shall be non-prorated. (This language supersedes specification section 07-54-19.) Written questions must be received by 5:00 PM, close of business on October 21, 2024