Site work for a detention facility in Raleigh, North Carolina. Completed plans call for site work for a detention facility.

Wake County General Services Administration is soliciting bids for the replacement of the security gate on the east side of the Detention Center at the maintenance/loading dock area. The existing 14' chain-link sliding gate with razor wire was recently damaged. The gate fell to the ground and damaged the gate controller and associated bollards. A temporary fence has been installed until the new gate can be installed. The scope of this project is to remove the temporary fence, install a new security gate to match the original gate, remove all remnants of damaged infrastructure, and install new gate controller, bollards, and all security features of the original gate. The existing gate on the west side of the Detention Center at the parking garage should be referenced for construction methods and materials. Photos are attached. BID SCOPE: o Provide labor, services, materials, equipment, and tools necessary for installation of 25 LF of 14' high sliding security gate and all associated equipment and infrastructure. o Install temporary orange safety cones and/or fencing around perimeter of work area. Contractor to maintain secure project perimeter throughout the duration of the project. o Contractor to field verify dimensions of existing conditions. o Remove and dispose of all existing gate materials that are no longer needed. o Existing temporary fence to remain in place during construction. o Contractor to verify on-site that all existing infrastructure to re-use will be fully compatible with structure of and operation of the new gate. o Security scope of work will be reviewed at the mandatory pre-bid meeting. Contractor to include a $20,000 allowance in the base bid price to cover all required security work. o Install new 14' high sliding security gate and all associated equipment and infrastructure in the location of the original gate. o Tie existing chain-link security fence and razor wire to new gate. Fastening method to be stretcher bar and bands to match existing. o Ensure all horizontal framing members are installed on the outside of the gate. o Contractor shall provide gate controls in NEMA 4X Stainless Steel enclosure. o All work shall be completed as detailed in the contract, drawings, and pre-bid meeting upon receipt of a notice to proceed document. o Contract bid shall be on a lump sum (total price) basis. o The contract may become null and void if the work is not performed within agreed upon dates. NOTICE TO BIDDERS o Contractor shall be responsible for removal of all equipment, debris, and trash from site at project construction completion. o All work included in this contract shall be completed within sixty (30) calendar days of the notice to proceed. Questions Related to This Project Should Be Submitted by E-mail to Ralf.mast@wake.gov Before 3:00 Pm Friday, October 18, 2024