Site work and paving for a road / highway in Ida Grove, Iowa. Completed plans call for site work for a road / highway; and for paving for a road / highway.

A. This work shall consist of furnishing all materials, equipment, labor, and preparation necessary for the application of the polymer modified asphaltic rejuvenating emulsion (PMRE) scrub seal. A PMRE scrub seal is the application of PMRE with a scrub broom followed immediately by an application of a single layer of cover aggregate. B. The applied material shall completely seal the pavement surface and provide a uniform textured surface. The treatment can be applied as a wearing surface or as an interlayer. C. On Primary Road projects where limestone or crushed gravel cover aggregate is used, dust control shall be required by applying diluted asphalt emulsion to the completed scrub seal surface. On non-Primary Road projects, dust control shall be as specified in the contract documents. D. When the contract documents specify, place a bituminous fog seal meeting the requirements of Section 2306 of the Standard Specifications to the completed polymer scrub seal surface. 241119 R4 Seal Coat Counties : Crawford NHSN-059-5(069)--2R-24 Route: U.S. 59 Crestview Ave in Denison to N Jct IA 141 Late Start Date: 2025/06/02 Working Days : 70 Guaranty: $50,000.00 Estimated Value: $750,000 - $1,000,000 Unless otherwise specified, a bidder shall submit a proposal as per Article 1102.09 of the Standard Specifications. Proposals received after the bid deadline will not be read. Proposals containing any reservations not provided for in the forms furnished will be rejected. The Iowa DOT reserves the right to waive technicalities and reject any or all bids. Unless otherwise specified, a bidder must submit a proposal guaranty/bid bond with each bid as per Article 1102.11 of the Standard Specifications. Failure to execute a contract and file an acceptable performance bond and certificate of insurance within 30 days of the approval date for awarding the contract will be just and sufficient cause for the denial of the award and forfeiture of the proposal guaranty. The Iowa DOT (or other approved contracting authority) hereby notifies all bidders that it will affirmatively ensure that in any contract entered into pursuant to this advertisement, disadvantaged business enterprises will be afforded full opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, or national origin in consideration for an award. Minimum wage rates for all federal-aid projects have been predetermined by the U.S. Secretary of Labor and are set forth in the specifications. However, this does not apply to projects off the federal-aid highway system. All federal-aid projects are subject to the Contract Work Hours Standards Act, as amended (title I of Pub. L. 87-581, Aug. 13, 1962, 75 Stat.357) and implementing regulations. IADOT - 203 - Seal Coat - US 59 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.