This is a service / maintenance or supply contract in Dixon, Illinois. Contact the soliciting agency for additional information.

This project requires 24% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on January 22, 2025, at 9:30 AM at the Region Two/District Three Office in Ottawa. Phase I/II engineering services are required for various projects throughout District Three. Phase I engineering services, if required, may consist of geometric studies, environmental studies, safety studies including crash analysis, and preparing project reports. This work may include data collection, development of alignment alternatives, cost estimates, traffic management analysis, crash analysis and other related work and exhibits necessary to complete the Phase I preliminary engineering. Phase II work, if required, may consist of, data collection, geometric studies, roadway plans, and any other related work to complete final plans, specifications, and estimates as necessary. The various proposed projects may consist of simple patching and resurfacing, widening, and resurfacing, and/or new roadway projects. The department will furnish the Consultant with any relevant available information such as as-built plans, field notes, traffic data, crash data, agency coordination, right-of-way data, aerial photos, boring logs, and other information. The estimated engineering fee for this project is $1,000,000. The completion date for this contract will be 60 months after authorization to proceed. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the following categories to be considered for this project: Highways (Roads and Streets) Location Design Studies (Rehabilitation) Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. IDOT - 29 - RFP - Various Phase I/II Projects, Various Routes, Various Counties, Region Two/District Three