Remodeling of a laboratory facility in Onamia, Minnesota. Completed plans call for the remodel of a laboratory facility.

1. Selectively Demo office area and bathroom partition walls as needed to allow for plumbing and electrical rough-in work. Remove bathroom vanity, bath accessories as needed. Protect from damage for re-installation when plumbing rough-in and drywall work is completed. 2. Contractor shall provide and utilize temporary protection of the surrounding office space. Protect all surrounding spaces and areas during construction activities. 3. Provide and install Sanivite drain pump 008 with Sanialarm in the new lab space to be installed under the new sink. Follow manufacturers installation instructions. Install waste and vent lines vertically in the partition wall, and across bathroom ceiling to existing plumbing wall. Connect 1-1/2" discharge waste line and vent line into the existing DWV system. 4. Supply and install insulated pex hot and cold water supply lines from existing plumbing wall across the ceiling and into the new plumbing wall partition for the new sink. Make all connections and provide new shut off valves for the new sink. 5. Install backer as needed in partition wall for installation of new plumbing fixtures and accessories in the Lab space. 6. Add electrical receptacle for the Sanivite drain pump. (Existing electrical circuit in wall) 7. Frame and drywall to create ceiling soffit in the bathroom space to conceal all of the new plumbing lines. Install false return air grill in soffit to prevent potential freezing. 8. Install the following Owner provided fixtures including Emergency Shower / Eyewash station, Utility sink, faucet, drain assembly and wall shelf. Provide any needed connection fittings, valves, drain trap, anchors, etc. to complete the installations. 9. Patch and repair drywall finishes and paint the lab space and bathrooms where disturbed. (Sherwin Williams Dover White). Restore other finishes as needed affected by this work. 10.Contractor to include $4,000 Owner Contingency Allowance in the base bid to be utilized by the Owner for unseen conditions. 11.Contractor to submit for MLBO Building permitting. Permit fee schedule will be provided. 12.Contractor to include 1/2 % TERO fee in base bid. Submission of TERO Compliance plan for approval will be required. Interested bidders shall contact Ryan Jendro, Project Manager, at 320.630.5011 or at ryan.jendro@millelacsband.com to obtain bid form and to be included on the bidder's list in the event that any addendums are issued for this project. The Band reserves the right to reject any bid that it is unable to collect at the Onamia post office by the bid deadline date and time, provided that the Band has made diligent and reasonable efforts to collect the bid. The Band reserves this right even in the event that the bid has been postmarked before the deadline.