Renovation of a clubhouse / community center in Coquille, Oregon. Completed plans call for the renovation of a 14,000-square-foot clubhouse / community center.

Work on this project consists of an approximately 14,000 sq. ft. reroof of the Coquille Community Building, including removal of existing roofing and inspection and repair of the roof substrate. The roof consists of approximately 7,000 sq. ft. of low slope membrane and 7,000 sq. ft. of asphalt shingles, with an alternate bid for standing seam metal. Additional work will include the repair of siding and trim, and the installation of permanent access provisions including a roof access hatch, roof ladders, and inspection anchors. To preserve the historic character of the facade, custom sheet metal will be required to replace a concealed gutter feeding internal downspouts. The Owner reserves the right to reject any and all bids, and to waive any technicalities or informalities in connection therewith. No bidder may withdraw his bid after the hour set for the opening thereof until the lapse of thirty (30) days from the bid opening. This contract is for public work and is subject ORS 279C.800 to 279C.870 regarding prevailing wage rates. Bids must be fully completed in the manner provided in the Instructions to Bidders upon the official bid form provided within the Project Manual, and accompanied by a certified check or a bid bond executed in favor of the Owner in an amount not less than ten percent (10%) of the total amount of the bid A Performance Bond and Labor and Material Payment Bond shall be required. Contractor shall provide separate Performance Bond and Labor and Material Payment Bond made payable to the Owner issued by a Corporation legally licensed to transact business in the State of Oregon. Corporation issuing such a bond must comply with applicable Oregon Statutes for public work and be satisfactory to the Owner. The bonds are to be in the amount of 100% of the contract sum to assure the Owner of full and prompt performance of the Contract. Question Deadline 02/13/2025