Site work for a mixed-use development in Pennsauken, New Jersey. Conceptual plans call for site work for a service station / car wash facility; and water / sewer project.

The initial Construction Cost Estimate (CCE) for this project is $1,537,500. The consultant shall also have in-house capabilities or Sub-Consultants pre-qualified with DPMC in P002 Electrical Engineering, P007 Structural Engineering, P011 Environmental Engineering, P015 Land Surveying, and P025 Estimating/ Cost Analysis. The objective of this project is the design and installation of a new above ground fuel dispensing facility with a new 6,000 gallon unleaded gasoline fuel above ground storage tank (AST) and a 4,000 gallon diesel fuel AST, new material storage bins, and a new generator at the NJDOT South Pennsauken Maintenance Yard located in Camden County. The project is to include the evaluation, design, and relocation of the new fuel facility to another location at the project site in order to reduce traffic congestion. New site pavement at the project site will be provided. The water supply pipe to the main maintenance building will be upgraded to increase the water flow rate to facilitate faster filling of roadway maintenance equipment and improved efficiency of roadway maintenance operations by the DOT. Technical Proposals will be evaluated by the Selection Committee based upon the following evaluation criteria: 1. Firm/Team Organization/Sub-Consultants 2. Experience of the Firm, Project Team and Key Team Members 3. Project Approach/Understanding of Project 4. The Firm's Approach to Maintaining the Project Schedule Pursuant to N.J.A.C. 17:13-1.1 et. seq., this project has been designated as a Small Business Set Aside Opportunity. All questions concerning the Small Business Set-Aside Program should be addressed to: Division of Revenue and Enterprises Services Small Business Enterprise Department of the Treasury 33 West State Street, 5th Floor P.O. Box 026 Trenton, NJ 08625-0026 Phone: 609-292-2146. In order to be included in the random selection process, a firm must be pre-qualified by the DPMC in the following discipline(s) on or prior to January 31, 2025. The method of Contractor Selection has not been Determined at this time.