Site work for a civil project in Iroquois Falls a, Ontario. Completed plans call for site work for a bridge / tunnel.

Request for Bids (RFB) for Burt Creek Culvert Replacement, along Watabeag Road, approximately 24 km west of Kirkland Lake, Ontario, Ministry of Natural Resources Scope of Work The Contractor shall undertake and complete the replacement of two culverts (which culverts are sometimes referred to with the reference 'KIR-0006'), one round corrugated steel plate culvert (CSP) approximately 2.7 m in diameter with a length of 44.1 m and one pipe arch culvert approximately 3.6 m wide x 2.2 m high with a length of 24.4 m. The Existing Culverts are located on Watabeag Road over Burt Creek approximately 8 km north of Highway 66, near Kirkland Lake, Ontario. The Contractor will replace the Existing Culverts with a 42.0 m long x 7.5 m span x 3.8 m rise bridge plate arch culvert, as further described in the Contract Drawings and Specifications. Work in this scope includes but is not limited to the following: Traffic control measures for full road closure. Installation and maintenance of all sediment and erosion control measures. The removal and disposal of trees, shrubs, and vegetation gathering around the embankments of the existing culvert. The placement of a bypass culvert to facilitate the upstream flow from the lake down the channel. The removal and disposal of the existing culvert and the placement of the proposed culvert specified in the Contract Drawings. Verification that the elevations of the as-constructed culvert meet the design is critical to ensure that the existing flow capacity and navigability of the crossing is maintained. The removal of the previously placed bypass culvert. The backfill and compaction of granular material over and around the culvert in the areas specified on the Contract Drawings. The grading of embankments and installation of slope protection to be placed to the extent specified on the Contract Drawings. Documents can be obtained from https://ontariotenders.app.jaggaer.com/