Renovation of a power facility in Washington, District of Columbia. Completed plans call for the renovation of a power facility.

The purpose of this project is to replace the aging Steam-line Expansion Joints (A-Line) in the Y Tunnel, which was built in the early 1930s and supplies steam and chilled water service to various jurisdictions. The A-Line is around 3,300 linear feet long. The project involves replacing the aging Steam-line Expansions Joints (A-Line) located in the Y Tunnel. The scope includes: o Removing the aging steam line expansion joints. o Installing new expansion joints on the high-pressure steam line. o Repairing, removing, replacing, or updating structural pipe supports at discrete locations. o Performing any associated concrete work (walls, ceilings, or floors) where pipe supports and other structural steel supporting the steam line infrastructure is embedded. o Removal of existing expansion joints (around 25-27) on high pressure steam lines between stations 0+00 and 29+50 on 14" Dia steamlines . o Replacement of Expansion Joints to accommodate thermal expansion in the same section. o Includes expansion joint replacements and related structural work, as well as elbow replacements. o All tasks are to be carried out as per contract drawings and specifications which will be made available early 2025, under the direction of the contracting officer. o All work is to be completed during the warmer months from May 2025 through September 2025, with the line returned to CPP jurisdiction for recharging no later than September 30, 2025. Value : $5-10 Million *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.