This is a service / maintenance or supply contract in Arlington, Virginia. Contact the soliciting agency for additional information.

Any questions regarding this invitation for bid shall be addressed to Lora Hagarty at Lora.Hagarty@VDOT.Virginia.gov. The issuing office shall determine whether any addendum should be issued as a result of any questions or other matters raised. Provide questions no later than 3:30PM EST on February 3, 2025.To provide plumbing maintenance, repair, improvement and renovation services for facilities located within the Northern Virginia (NOVA) District which is comprised of the counties of Arlington, Fairfax, Loudoun and Prince William. The Contractor shall provide all necessary labor, supervision, equipment, tools, materials, supplies, and all incidentals, as necessary, to provide commercial plumbing and gas fitting services on a time and materials basis to the facilities owned and operated by the VDOT Northern Virginia District. The Prime Contractor shall perform 75% of services. Services requested under the scope of this contract will include all piping from/to utility service connections (water, wastewater, and storm water) throughout the VDOT lot to final interior or exterior application. Such services may include, but are not limited to: a. Interior, exterior, and underground leak or infiltration detection, isolation and repair to include the ability to camera scope up to 500 feet and clear stoppages/obstructions ("snake") within sanitary and storm sewers. b. Maintenance, repair, replacement, restoration, and/or installation, to include clearing stoppages, of indoor and outdoor plumbing fixtures such as sinks, toilets, urinals, hot water heaters, faucets, water fountains, hose bibs, etc. c. Size and establish interior, exterior and underground piping to move air, gas, or liquids such as water, wastewater, brine, or chemicals to/from storage tanks, pumps, fixtures and equipment such as potable water applications, brine-making equipment, water heaters, ice machines, boilers, baseboard heating systems, air systems, etc. d. Install, replace, test, repair, and maintain safety and conservation measures such as shut-off valves, diverter valves, metering devices, spill containment measures, pipe insulation, etc. e. Utility detection, in-ground trenching, excavation, and backfilling to fix leaks and install pipes at protected depths from freezing and overhead loading from heavy vehicles. f. Any other work that is, according to local industry standard operating procedures, typically considered to be plumbing in nature g. Preparing schematics, drawings, or riser diagrams of work planned and/or completed.