Renovation of a multi-residential development in Shoreline, Washington. Completed plans call for the renovation of a multi-residential development.

King County Housing Authority (KCHA) is seeking qualified contractors interested in submitting Bids for Fire Restoration at Ballinger Commons. Work consists of fire restoration including, but is not limited to. supervision, Labor, materials, supplies, equipment, services, MEP permits, engineering, and the manufacture and fabrication of components, performed, furnished, or provided m accordance with the Contract Documents. For questions, please contact Michelle via email at MichelIeJ@kcha.org. SCOPE OF WORK: Work includes, but is not limited to, fire restoration at Building A, including labor, materials, supplies, equipment, services, MEP permits, engineering, and the manufacture and fabrication of components, performed, furnished, or provided in accordance with the Contract Documents, and additional work described in project manual. Project Location: Ballinger Commons Apartments, 2405 N 202nd Pl, Shoreline, WA 98133 1. Building A, Units 101, 201, 301, 302, 305, 306. Includes Common Breezeways, Storage Closets, Rear Decks & Patios, Roofing, Siding, and Stairs C. The Work consists of fire restoration at Building A as described in the Contract Documents including, but is not limited to, supervision, labor, materials, supplies, equipment, services, MEP permits, engineering, and the manufacture and fabrication of components, performed, furnished, or provided in accordance with the Contract Documents. D. Products included in the Ballinger Commons Materials List are to be used when called out. Contractor is required to provide submittals for all items listed prior to ordering or installing any listed items. E. All electrical items (outlets, switches, fixtures, wiring, rough-in boxes, terminations, etc.) are to be installed per current code requirements. Contractor to schedule owner walk through of each unit after rough in boxes are installed but prior to pulling any wire to insure all locations are approved. F. All plumbing items ( supply and drain lines) are to be installed per current code requirements. Contractor to schedule owner walk through of each unit after plumbing rough in but prior to installation of insulation and/or cover with GWB and finishes. G. All mechanical items (fans, duct runs, controllers) are to be installed per current code requirements. Follow IMC code section 403.4.7 for exhaust in the kitchens and bathrooms. Mechanical contractor to provide proposed design/build systems that meet code requirements. Contractor to schedule owner walk through of each unit after mechanical rough in prior to cover. H. Contractor to submit truss package engineering from the manufacturer and receive approval from the architect and city inspector prior to ordering truss package. NTP to be issued after truss package is made available for installation. Question Deadline Mar 27, 2025 at 9:00 AM