Site work and paving for a civil project in Melbourne, Florida. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Counties: Brevard Road Name: SR 404 Limits: 70004000 Project(s): 44878515201(*) Federal Aid No: N/A Total Roadway Length: 3.118 Miles Contract Days: 210 Total Bridge Length: 0.891 Miles Total Proposal Length: 4.009 Miles Contract Execution Days: 10 Special Start Date: N/A Aquis/Flexible Start Time: 120 Lead Description: The Improvements under this Contract consist of milling and resurfacing on SR 404 from west of SR 5 (US 1) (MP 0.581) to SR A1A (MP 4.590) approximately 4.009 miles in Brevard County. Additional items include milling and resurfacing of the interchange ramps at SR 5, CR-3 and SR 513, paved shoulder construction, signalization and installation of wrong way driving vehicle detection systems. Prequalification Required Question Deadline 03/25/2024 at 5:00 PM Questions posted to this site will be responded to by the Department. For questions posted after this time, an answer cannot be assured. For all questions posted before the deadline, FDOT will provide and post responses on online. For bids over $150,000.00, the standard proposal guaranty of 5% of the bid will be required, unless otherwise stipulated in the proposal advertisement. A Proposal Guaranty of not less than five percent (5%) of the total actual bid in the form of either a certified check, cashier's check, trust company treasurer's check, bank draft of any national or state bank, or a Surety Proposal Guaranty made payable to the Florida Department of Transportation must be received for each bid in excess of $150,000.00. A 100% Payment and Performance Bond will be required for all projects. All work is to be done in accordance with the Plans, special Provisions of the State of Florida Department of Transportation. FDOT - Call Order: 001 Resurfacing - SR 404 Proposal Budget Estimate: $11,592,584.00 QA: Minimum inside dimensions for the bridge mounted junction boxes are 21 inches in length, 10 inches in width, and at least 8 inches in depth. Both runs of bridge-mounted conduit will connect to the same junction box.