Site work and paving for a road / highway in Stockbridge, Georgia. Design plans call for site work for a road / highway; and for paving for a road / highway.

As of November 24, 2025, this project is in the design phase. A design firm has been awarded as a result of the previous solicitation. A firm timeline has not been determined. ...................................... The services to be furnished by the consultant shall be those necessary to perform survey, database preparation, preliminary construction plans, preliminary and final utility plans, right-of-way plats, staking of the required right of way, and final construction plans including signing, marking, erosion control, traffic handling, and construction sequence plans and specifications including special provisions for Flippen Road at McCullough Road Intersection Improvement project. 2. The work shall consist of complete hydraulic analysis for roadway structures. 3. All engineering activities shall be accomplished in accordance with GA DOT’S Plan Presentation Guide and GA DOT Design Policy Manual. The geometric details of each roadway shall be prepared to the latest edition of the American Association of State Highway and Transportation Officials, hereinafter referred to as “AASHTO”, GA DOT’S Standard Specifications for the Construction of transportation Systems, Project Schedules, Henry County Design Standards Highway Capacity Manual, AASHTO Roadside Design Guide and the Manual (latest edition) on Uniform Traffic Control Devices (latest edition). 4. All plans shall meet GDOT’S plan Presentation Guide. 5. Consultant shall design the Stopping Sight Distance and Intersection Sight Distance per Henry County Code. 6. Construction plans shall include all required construction quantities in accordance with the GDOT Standards and Specifications and itemized using the GDOT Pay Item Index. 7. Right-of-way plats shall show each affected property with owner’s name, Parcel ID number, tax map identification number and require rights-of-way area with legal description. All requirement easements (construction, driveway, permanent drainage and temporary) shall be shown. Plats shall be prepared for each individual parcel involving required right-of-way and/or required easements to construct the project as described in the GA DOT Plan Presentation Guide. 8. All drafting and design work performed on the project shall be done utilizing Microstation, OpenRoad or InRoads software respectively, and shall be organized as per the GA DOT’S Guideline on Electronic File Management. 9. Consultant shall provide information necessary for early coordination with Utility Companies. 10. The required right-of-way width for the project shall be 80 feet unless otherwise needed. 11. No work shall be performed on any phase of design until the County’s SPLOST Transportation Director has given a written notice to proceed. This project involves the collection of survey data, roadway design, right-of-way, drainage design and all other work necessary to produce a complete final set of plans suitable for use by a contractor for the construction of the intersection improvements for Design Services for Flippen Road at McCullough Road. 2. The design criteria for this project must meet existing speed limit for Flippen Road at McCullough Road. 3. The consultant and sub-consultant shall be prequalified with the Georgia Department of Transportation. Question Submission Deadline:June 17, 2025, 3:00pm Henry County reserves the right to reject any proposal if the evidence submitted by or investigation of, the proposer fails to satisfy the County that the proposer is properly qualified to carry out the obligations of the Contract.