Site work for a water / sewer project in Adairsville, Georgia. Completed plans call for site work for a water / sewer project.

The City of Adairsville is soliciting proposals from qualified vendors for a multi-year project to replace all meters within the water distribution system. The selected vendor will be required to provide accurate, reliable, and durable water meters that meet the specifications outlined in this Request for Proposal (RFP). This procurement process is aimed at securing water meters that will enhance the City's water distribution system. Vendors must meet the required delivery timelines, product specifications, and other evaluation criteria outlined in this document. II. Scope of Work: The successful vendor will provide water meters that meet the following requirements: _ Meter Types: Has to support Itron ert. _ Meter Sizes: 5/8", 3/4", 1", 2", etc. _ Meter Specifications: 1. All cold water meters (positive displacement type - magnetic drive 5/8"x _") furnished shall be produced from a manufacturing facility whose QMS is ISO 9001 certified, conform to the "Standard Specifications for Cold Water Meters" C700 latest revision issued by AWWA. 2. Only magnetic-driven, positive displacement meters of the flat nutating disc type will be accepted because of enhanced low flow accuracy performance. The size, capacity, and meter lengths shall be as specified in AWWA Standard C700 (latest revision). The maximum number of disc nutation's is not to exceed those specified in AWWA C700 latest revision. 3. The meter maincase and cover shall be cast from NSF/ANSI 61 and NSF/ANSI 372 certified lead free alloy containing a minimum of 85% copper. The serial number should be stamped between the inlet or outlet port of the maincase and the register. Maincase markings shall be cast raised and shall indicate size, model, direction of flow, and NSF/ANSI 61 certification. Plastic maincases are not accepted. 4. All lead free maincases shall be guaranteed free from manufacturing defects in workmanship and material for the life of the meter. To ensure accuracy, each meter must be accompanied by a factory test tag certifying the accuracy at the flows required by AWWA C700. _ Installation: Vendors should provide support for installation or training if applicable (optional). Any questions regarding this RFP must be submitted in writing to Caleb Martin at cmartin@adairsvillega.net by March 28, 2025 at 9 am local time Responses to questions will be provided to all interested vendors.