Site work and paving for a road / highway in Oakfield, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Town of Oakfield is seeking sealed bids for the following road projects:Chip Seal Projects:Chip seal bids shall be on a per mile basis.1. Centerline Road (Breakneck Rd to Kinwood Rd): approx. 0.50 miles x 21 feet. Hot oil single chip seal coat application using F2 1/8" granite black stone2. Mill Pond Road (CR-Y heading North 1 mile): approx. 1.0 mile x 22 feet. Hot oil single chip seal coat application using F2 1/8" granite black stone3. Wolf Road (CR-AS to HWY 151): approximately 1.70 miles x 21-22 feet. Hot oil single chip seal coat application using F2 1/8" granite black stone4. Oak Center Road (CR-AS to the Waupun township line): 3.52 miles x 23-25 feet. Hot oil single chip seal coat application using F2 1/8" granite black stone Cold Mix Wedging Projects:1. Wolf Road (CR-AS to HWY 151): approximately 1.70 miles x 21-22 feet.Cold mix wedging in multiple sections 2. Oak Center Road (CR-AS to the Waupun township line) approximately 3.52miles x 23-25 feet. Hot mix or Cold mix wedging in multiple sections (contact Road Supervisor)For hot mix or cold mix asphalt spot wedging, quote must include price per ton for material laid in place and compacted, along with the estimated number of tons to be used for the project. Contractors are to supply all labor, mate-rial, traffic control, signing and proof of insurance. The Town Board reserves the right to reject or disregard any or all bids, or parts of bids, which do not adequately respond to the specifications requested in the bid notice. The bidders are reminded that the work must be completed to State of Wisconsin DOT standards.