Renovation of a detention facility in Philadelphia, Pennsylvania. Completed plans call for the renovation of a detention facility.

The Federal Bureau of Prisons (FBOP), Federal Detention Center located at 700 Arch Street in Philadelphia, Pennsylvania intends to make a single award to a responsible entity that will provide all necessary equipment, labor, materials, and incidentals to replace a C-7 / C-8 cooler door. The cooler door is to be replaced by an oversized door. Alterations to the cooler wall panels will be made by the contractor to fit the new larger door. Any support needed to accommodate the larger doorway will be installed by the contractor. All equipment and materials needed to complete the installation will be furnished by the contractor. The new size of the door is to be 60" X 78". All work is to be performed after hours when the kitchen is close as not to interrupt daily operations. QUESTIONS REGARDING ANY CONTENT TO INCLUDE THE SPECIFIC ITEMS ON THE SOLICITATION, SHALL BE ADDRESSED TO MR. BRIAN VIRGILLO @ bvirgillo@bop.gov AND MR. A. APONTE-BERRIOS @ AAPONTEBERRIOS@BOP.GOV The contractor shall perform removal and replacement of the door and make all necessary alteration to the cooler walls to fit the new larger door. -Mobilization of materials to include purchase and delivery of new door and all materials need to complete the installation to the institution. - Assemble or install all rigging equipment needed for installation. - Disassemble and remove existing door to include all electric and plumbing connections. - Make necessary cuts to cooler walls to enlarge the doorway to accommodate oversized door. - Ensure proper supports are in place to stabilize the structure of the cooler during alterations. - Install new lintel to support the header and ceiling of the cooler and maintain structural integrity of the unit with new larger doorway. - Install new overlay frame and door making all adjustment for proper fitment. - Test the function of the door opening, closing, latching, and gasket seals. - Extent and connect all electric and plumbing connections to new door and wall. -Install capping over new door jamb - Paint all surfaces to match the color of the door as close as possible. - Restore electrical power to the door and verify all heated surfaces are heating properly. - Install a new heavy-duty barrel lock set on the exterior of the door. - Dispose of old door and all debris generated from alterations to the cooler.