Site work and paving for a road / highway in Rush, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Bids for this Contract shall be accompanied by a Bid Security in the amount of ten percent (10%) of the Bid. All Bids shall be effective for sixty (60) calendar days. The Work must be completed prior to August 22, 2025. Question Deadline 05/08/2025 at 4:00 PM ET Location online portal. The Work generally consists of furnishing all equipment, labor and materials for, but not necessarily limited to, the following: Double Bituminous Seal Coat (25,481SY) and FOG Seal (25,481SY). The full scope of work and the locations are more specifically identified in the project manual/bid documents and project drawings. The successful Bidder will be required to furnish and pay for a satisfactory Performance Bond, and a Labor and Material Payment Bond, each in the amount of 100% of the Contract Price with a corporate surety approved by the Owner. Liquid Fuels funds will be utilized for funding a portion of this project and all materials and work must conform to the most recent edition of PennDOT Publication 408 in place at the time of bid submission unless otherwise specified. Bidders must be either a PennDOT Pre-qualified Prime or PennDOT Pre-qualified Sub-Contractor for Work Class F4. Rush Township reserves the right to reject any or all Bids or portions thereof, and to accept any Bid, or portion of Bid, and the right to waive any immaterial defects in the bidding process, which in its judgment is in the best interest of the Township. Rush Township and their representatives are not responsible for bids mailed but not received. All BIDS shall be sealed and marked as identified in the project documents. Project Location GROVE STREET, MEADOW AVENUE, TAMAQUA STREET, RYAN AVENUE, FRANKFORD AVENUE, RUSH TOWNSHIP, SCHUYLKILL COUNTY All work to be completed as follows: DESCRIPTION This work is for the complete in-place application of a quick setting, polymer modified, hard PG binder, emulsified fog seal, which is specifically designed for use over a chip seal. MATERIAL As supplied from an approved producer listed in Penn DOT Bulletin 15. Material must meet the specifications listed below.