Site work and paving for a road / highway in Madison, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The project work consists of Chip Seal Surfacing on various Town roads within the Township. Chip Seal Bituminous material: Chip Seal Asphalt Cement PG-58-28 with no cutback or as compatible with aggregate Cover aggregate 3/8" washed, fractured pea stone aggregate or as requested by project. (Town will consider other cover aggregate if price is provided) All work must be completed by August 31, 2025 Questions concerning the road shall be directed to the Josh Jones, Town Patrolman at 608-212- 7513. CHIP SEAL COAT - A. Each Road shall constitute a separate project. A separate bid must be submitted for each road. B. The bidder shall recommend and clearly specify the following information on each bid form. Bituminous material: Asphalt Cement PG-58-28 with no cutback or as compatible with aggregate Cover aggregate 3/8" washed, fractured pea stone aggregate, (Town will consider other cover aggregate if price is provided (see Project 3) Contractor provides aggregate Material Quantities to be used: Asphalt 0.35 gallons MIN. per Square Yard Aggregate 24 pounds MIN per square Yard Final cost of road based on roads actual width. Town will patch as necessary prior to Chip Seal Project 1 Chip Seal Road Name: Taylor Road Start/End Points: CTH Y - Cul-de-sac Total length of project area: 1.47 miles Project 2 Chip Seal Road Name: Dunlap Hollow Start/End Points: USH 12 to Town Line Total length of project area: 3.55 miles Project 3 Chip Seal Road Name: Mack Road Start/End Points: STH 188 to Inama Road Total length of project area: 1.44 miles