Renovation of a residential development in Riverside, California. Completed plans call for the renovation of a residential development.

The Contractor shall furnish all labor, materials, parts, equipment, tools, supervision, services, transportation, waste disposal, facilities and other required items necessary to complete the following work in strict accordance with all of the Attached Bid Documents (including Documents A-G). JOBSITE: RUHS Hulen Place Housing 2800 Hulen Place Riverside, CA 92507 Question Deadline 05/23/2025 at 1:30 PM PT Deadline For Submission of Questions: Email: erwoods@rivco.org (E-mail required). It is the responsibility of the bidder to confirm transmission of correspondence. The general scope of this project includes the installation of telecommunications cabling infrastructure for the RUHS Hulen Place Housing Remodel at 2800 Hulen Pl, Riverside, CA 92507. The project shall consist of the provision, installation, termination, testing and documentation of a complete fully functional structure Category 6 horizontal cabling system, ISP optical fiber backbone cabling and ISP copper backbone cabling. It also includes provisions and installation of cabling for paging, wireless access points, Access Control, and CCTV systems. All work must adhere to all Riverside County Information Technology (RCIT) specifications and standards. It is the Contractor's responsibility to ensure all labor and materials needed to deliver a complete, fully functional system that complies with all applicable codes, industry standards and industry best practices are accounted for in the cost proposal. Other trades will be working in the facility concurrently, and it is the Contractor's Superintendent/Foreman responsibility to coordinate work with other trades during this project to prevent conflicts and to adhere to the construction schedule. All Contractor personnel performing work associated with this project shall wear shirts and/or badges clearly identifying their company. The Contractor shall provide safety equipment to each employee to be used as appropriate or required for the work. (e.g., eye protection, sound suppressors, hard hats, gloves, respirators, etc., as required). The project will in general include the following: Build out of (1) Telecommunication Rooms to include, but not limited to: The provision of racks, horizontal cable termination equipment, ladder rack, and support structure above ceiling. Vertical and horizontal cable management and bonding. Installation of (18) Work Area Outlets, using 2 Category 6 cables at each location. Installation of (5) TV-AV Outlets, using 2 Category 6 cables at each location. Installation of (1) Wall phone locations, using 1 Category 6 cable at each location. Installation of (9) Wireless Work Area Outlets; using 1 Category 6A cable at each location. Installation of (17) Security Camera cabling locations, using 1 Category 6 cable at each location. Installation of (13) Access Control door locations. Installation of (1) 25-pair ISP copper backbone cables. Installation of (1) 12 strand singlemode fiber optic backbone cables. Installation of (22) ceiling mounted IP Speakers with cabling home runs. Documents included in this RFB: Document A - Technology Scope of Work. Document B - Contractor's Bid Page; Bidder will need to review the page in its entirety and provide the totals requested on the Contractors Quote. Document C - General Terms, Conditions and Contractor Qualifications Document D - Supplemental Installation Instructions Document E - Cable Certification Document F - RUHS Hulen Place T