Renovation of a conference / convention center in Pittsburgh, Pennsylvania. Completed plans call for the renovation of a conference / convention center.

Replacement of Service Corridor Heaters as identified below for the David L. Lawrence Convention Center. The contract for this work will be with the Sports & Exhibition Authority of Pittsburgh and Allegheny County. The SEA has goals of 25% MBE and 10% WBE participation in this project. Bidders must provide a completed Certificate of MBE/WBE Participation form and a Solicitation Statement with their bid. Question Deadline 06/13/2025 at 10:00 AM ET Deadline for Questions Inquiries regarding the bidding should be made to the Sports & Exhibition Authority 171 10th Street, 2nd Floor, Pittsburgh, PA 15222, Attention: Lucas Kistler- E-mail: procurement@pgh-sea.com, Telephone: 412-325-6179. All Bids will require a ten percent (10%) surety in the form of a Bid Bond, a certified check, or cashier's check in the amount of no less than ten percent (10%) of the total amount of the Base Bid (unless otherwise noted in the Bid Form Document). The surety is required as a guarantee that the bidder will, if awarded the contract, enter into a written contract with the Owner. All sureties must be licensed to conduct business in the Commonwealth of Pennsylvania. Bid Bonds should name Owner as obligee. All checks should be made payable to the order of Owner. The work consists of steam heater replacements at the David L. Lawrence Convention Center as indicated in: a. Project Manual for Replacement of Service Corridor Heaters, dated May 30, 2025. i. Furnish and install all necessary equipment, supplies, and labor for the Replacement of Eleven (11) Service Corridor Heaters located in the DLCC Level 2 Service Corridor. 1. Model Number: Modine HC 165SB01SA a. BTU/HR Output: 160,050 b. CRF: 3240 c. Outlet Velocity (fpm): 880 d. Entering Air Temperature (Fahrenheit): 70 e. Final Air Temperature (Fahrenheit): 116 f. Fluid Type: Steam g. Steam Pressure (PSI): 5 h. Condensate (lb/hr): 167 i. Supply Voltage: 115/60/1 j. Motor Type: Enclosed Air Over with Thermal Overload k. Motor HP: 1/3 l. Motor RPM: 1075 m. Unit Amps: 4.2 - 4.6 n. Vertical Deflector Blades Model Number 14430 2. HVAC Piping Materials: Schedule 80 a. Route New 1 1/4 " Low Pressure Steam and 3/4 " Low Pressure Condensate Piping from existing steam piping main to new steam heaters. b. Include steam traps and all appurtenances to install a fully functional system. i. Strainer, Control Valve, Check Valve c. Existing control and power wiring will be connected to new steam heaters. 3. HVAC Piping Insulation Materials: 2" and Smaller Require 5" Thick Fiberglass Pipe Insulation with All Service Jacket 4. Mechanical Codes & Standards a. 2018 International Mechanical Code (IMC) b. 2018 International Energy Conservation Code (IECC) c. ASHRAE d. NFPA 5. Minimum 1-Year Parts & Labor Warranty Bids shall be sealed and submitted on the Bid form provided. Bids will be opened publicly. The contract will be a prime contract with the Owner. Bid pricing (for base bid and/or alternates) may be held open by Owner for a period of ninety (90) days following bid opening before award of contract.