This is a service / maintenance or supply contract in New York, New York. Contact the soliciting agency for additional information.

The following items of Work are required and included in this Contract: Removal and disposal of debris including, but not limited to: leaves, wood, plastics, sludge, grease, dirt, and other semi-solid and solidmaterials. 2. Clean existing underground sewer piping from house trap from the building(s) to the connection to the city sewer. The house trap pit shall also be cleaned. 3. Perform close circuit television (CCTV) inspection and video recording of the sewer pipes before and after cleaning. 4. Provide to NYCHA a written report of the condition of all sewers, including any broken or collapsed sewers. Also evaluate the condition of sewers based on video recordings and include these findings in the written report. 5. Provide all equipment, power, etc. to maintain drainage during operations. Provide all temporary by-pass piping, hoses, pumping system, energy, etc., to continuously maintain house sewer service during any interruption of such service. 6. The pipe cleaning can be accomplished by either: (i) Hydro Jetting (high pressure stream of water which is effective against greases and fats); or (ii) rodding of pipe (mechanically breaking down the obstructions within the path of the sewer line). 7. The Contractor, after completion of cleaning of pipes, shall inspect those pipes in question, by camera inspection to observe any potential defects the pipe may have. 8. Prior to rodding, the Contract shall dewater and pump water out of flooded areas (e.g. basement, boiler room, crawl space, etc.) for below grade areas. 9. The Contractor shall also sanitize affected areas as required after the rodding and cleaning of sewers is completed. To participate in the Pre-Bid Conference, please follow the options below: Microsoft Teams meeting (Join on your computer or mobile app) Option 1: Copy and paste the below into your browser Click here to join the meeting https://teams.microsoft.com/l/meetup-join/19%3ameeting_YmU1Nzk1YWMtMWEzZC00ZWJjLThkYWEtYjc5MTc2YTI2Zjk5%40thread.v2/0context=%7b%22Tid%22%3a%22709ab558-a73c-4f8f-98ad-20bb096cd0f8%22%2c%22Oid%22%3a%22781e2b6c-61d3-487b-9358-9f50e58c2c7c%22%7d Option 2: Join by entering a meeting ID Meeting ID: 277 056 146 045 7 Passcode: bU2ho9Tv Option 3: Call in (audio only) +1 646-838-1534,,142883372# United States, New York City Find a local number Phone conference ID: 142 883 372# Option 4: Access the attached document "TEAMS Meeting Link RFQs 514570-514571.docx" and click on the embedded link to join. Questions pertaining to this "Solicitation Series-RFQ#514570-514571" and submitted via the NYCHA Cyclical Procurement mailbox at: cyclical.procurement@nycha.nyc.gov (include RFQ number in subject field) prior to Question Deadline will be accepted. FQ Question Submission Deadline: Wednesday, 06/11/ 2025 at 2:00PM