Renovation of a mixed-use development in Exton, Pennsylvania. Completed plans call for the renovation of a educational facility.

Contractor will provide all necessary labor, materials and equipment to perform the following: 1. Supply and install one (1) new 80kw natural gas generator with the following options: standby 80kW natural gas generator, 208/120 volts, three-phase, 4-wire 60Hz, 1800 RPM one (1) 300amp Circuit Breaker, 3-pole, 600-volt AC, 80% UL 1" flexible fuel line and strainer Aluminum sound attenuated enclosure Deep Sea controller Battery charger w/rack and cables 2-year Base Warranty Operation & maintenance manuals 2. Supply and install one (1) new ASCO 400amp, 208/120-volt, 3-phase, 4-wire,3-pole, open-transition, Automatic Transfer Switch in a NEMA 3R enclosure with the following options: Source available lights Manual by-pass of transfer Automatic engine exerciser ATS position indicating contacts Heater w/ thermostat 3. Install the new ATS on the exterior of the building near the generator location. 4. Intercept the existing circuit feeding panels KP-1 and KP-2 and extend to the new ATS. 5. Supply and install new line and load conduits and cables from the KP-1 panel to the new ATS. 6. Supply and install new conduits and cables from the ATS to the generator as required. 7. Supply and install one (1) new conduit and cables from panel KP-1 to the generator for the block heater and battery charger circuits. 8. Supply and install new gas piping, valves and pressure regulator as required to extend the existing gas line to the new generator. 9. Provide the necessary crane and rigging to install the new generator. 10. Perform start up and commissioning on he newly installed equipment. Questions Due Date: Jun 6th 2025, 12:00 PM EDT