Site work and paving for a road / highway in New Lenox, Illinois. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Requests bids for Sealcoating, Crack Fills, & Striping. There will be no pre-bid meeting or scheduled walk-through for this project. Bidders shall email all question to Chuck Welke at cwelke@lw210.org and Ariel Palacios at apalacios@lw210.org by Monday, June 16, 2025 - please put both email addresses on all communication. Any questions submitted after this time will not be addressed. Answers will be emailed to all bidders by the end of the day on Wednesday, June 18, 2025. Work is anticipated to begin the week of Tuesday, July 1, 2025, and all project components at all sites must be completed by Monday, August 11, 2025. Lincoln-Way Central High School 1801 E. Lincoln Hwy. New Lenox, IL 60451 Lincoln-Way West High School 21701 S. Gougar Road New Lenox, IL 60451 Lincoln-Way East High School 201 Colorado Ave. Frankfort, IL 60423 Lincoln-Way Transportation Center 1343 S. Schoolhouse Rd New Lenox, IL 60451 All repairs shall be figured to be saw cut and deteriorated areas be removed to a depth of no less than 5" and replaced in two separate lifts of hot bituminous concrete 3.5" binder course and 1.5" of surface mix. Repair of any sub-standard aggregate stone base or subbase undercuts prior to asphalt installation shall be paid for from the allowance on the bid form. Any amount above the allowance will be considered incidental and contractor will not be additionally paid for such necessary repairs. The contractor shall include any additional unforeseen conditions in their base bids. All asphalt repairs will be required to be treated with a bio-based asphalt-rejuvenating agent. Scheduling for Asphalt Repairs: Each facility must be completed in totality before starting work on another. b) Crack Repairs Crack repairs to the facilities will require the use of two different materials for crack sealing, both rubberized and fiber modified liquid asphalt will be used. Direction will be given to the contractor as to which material will be required for each facility; generally, areas that exhibit cracking in closer or tighter (alligatored) areas that cannot effectively be routed will use a fiber modified crack filler. See below for specifications of each. The Work in this section consists of furnishing materials and equipment necessary to perform all operations for the application of an asphalt-rejuvenating agent. The rejuvenation of surface courses shall be by spray application of an agriculture based rejuvenating agent composed of soy oil derivatives and other agricultural oils. It shall be Biobased materials with a minimum of 75% bio-based content.