Site work for a municipal facility in Paris, Texas. Completed plans call for site work for a municipal facility.

Fencing & Security Upgrades, Paris District Location: 3600 Sw Loop 286 Project Id #: 01-470424520 City/st/zip: Paris, Texas 75460 District: Paris County: Lamar Bid Guaranty/bid Bond: $51,000.00 Questions Due Date: July 11, 2025 Pre-qualification of Contractors on Facility Contracts is Waived; However, the Uniform General Conditions Included in Each Proposal Document Outlines Specific Requirements for Contract Award. This Project Estimate is Greater Than or Equal to $100,000; Therefore, the Use of a Hub Subcontracting Plan (Hsp) is Required and Must Be Submitted With Proposal Package. TXDOT - 88-92 Fencing & Security Upgrades, Paris District PROJECT #S: 01-470424520, 01-470424588, 01-470424589, 01-470424590, 01-470424591, 01-470424592, 01-470424593, 01-470424594 a) Project # 01-470424520, Paris DHQ AEM MNT Facility, 3600 SW Loop 286 Paris Tx 75460, Lamar County, Site # 019020 b) Project # 01-470424588, Sherman AEM MNT Facility, 3904 US-75 South Sherman TX 75090, Grayson County, Site # 019002 c) Project # 01-470424589, Bonham MNT Facility, 2405 N Center St (Hwy 78) Bonham TX 75418, Fannin County, Site # 019505 d) Project # 01-470424590, Clarksville MNT Facility, 2002 W Main (US-82) Clarksville TX 75426, Red River County, Site # 019500 e) Project # 01-470424591, Mt Vernon MNT Facility, 104 E I-30 Mt Vernon TX 75457, Franklin County, Site # 019021 f) Project # 01-470424592, Sulphur Springs AEM MNT Facility, 1100 Hillcrest (SH 19 North) Sulphur Springs TX 75482, Hopkins County, Site # 019676 g) Project # 01-470424593, Greenville AEM MNT Facility, 3001 IH-30 East Greenville TX 75402, Hunt County, Site # 019064 h) Project # 01-470424594, Emory MNT Facility, 1520 W US-69 Emory TX 75440, Rains County, Site # 019031 This Project Includes furnish, install, and program access control, card readers, electrified locksets, door position sensors, gate releases, control panels, intercoms, access control cabling, gate operators, surge protection, card reader pedestals, and CCTV. Demolition of existing chain-link fencing and gates, clearing of trees, bush and vines, furnish and install new chain link fencing with top rail 3 strand barb wires and grounding. Furnish and install cantilever gates, V track gates, gate operators with safeties, safety loops, associated safety devices, Hoffman enclosures with all associated equipment. Install TXDOT furnished pedestals & pedestal base. Furnish and install concrete pedestal base foundation, pedestal card readers, intercoms, CCTV and required surge protection, control and power wiring. Written questions must be submitted no later than: July 11, 2025 The work of the project is to furnish, install, and program access control. This includes card readers, electrified locksets, door position sensors, gate releases, control panels, intercoms, access control cabling, surge protection, card reader pedestals, and CCTV (NVR(s), camera(s), POE power injector(s), client work station(s), monitor(s)). The system must be compatible and interoperable with TXDOT's latest version Software House CCURE as a standard. Work of the project also includes demolition of existing chain link fencing/gates, and rebuilding as indicated on the drawings. Clear trees, bushes, and vines as indicated on the drawings, 2' of each side of fence line where fence line is on TXDOT property. When fence line borders another property, line/fence line clearing to be coordinated with TXDOT project manager. A minimum of 2' clearing is required on TXDOT side. Stump grinding of trees, bushes, and vines shall be performed. Furnish and install 9 gauge, 6' chain link fence with top rail and 3 strand barb wire and/or associated components as indicated on the drawings. Furnish and install cantilever gates, V-track gates, gate operators with safeties, safety loops and associated safety devices to comply with UL-325 standards as indicated on the drawings. Install TXDOT furnished pedestals and pedestal bases. Furnish and install concrete pedestal base foundations, Hoffman enclosures, gate access control panels, power supplies, card readers, cabling, intercoms, camera, gate position sensors and required surge protection as indicated on the drawings and specifications. Contractor is responsible to verify all field conditions and dimensions for bidding and installation. Work at entrances shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance. Perimeter fence line and building security must be maintained and property line secured at all times. Furnish and provide a utility scan at each site. Refer to the specification requirements. Comply with local, state, and federal ordinances and laws. Project Location: TXDOT Paris District