Site work for a playground / park / athletic field in Gatesville, Texas. Completed plans call for site work for a playground / park / athletic field.

Materials and Installation of Baseball Dugout & Backstop Gatesville ISD is interested in receiving proposals from responsible parties, for the materials and installation of fencing, at the lowest cost possible. E-mail your questions to Leigh Ann Goodwin, lgoodwin@gatesvilleisd.org Bidders are reminded that verbal responses are not binding; only questions answered by e-mail or fax will be binding and will be made part of the bidding documents. Gatesville ISD must receive requests for clarification on bid specifications in writing no later than the close of business on July 9, 2025. E-mail your questions to LeighAnn Goodwin, Asst. Supt. Of Finance at lgoodwin@gatesvilleisd.org. ABSOLUTELY NO VERBAL RESPONSES WILL BE PROVIDED. Baseball Dugout and Backstop o Demo existing dugout and slab to include a portion of the sidewalk. o The new dugouts will be positioned to align with the existing r-panel fence. o The new dugouts are to be 14' x 46' on the new home side which is the south east side. o The visitor's side is to be 14' by 40' on the north west side. o The heights of the dugouts should be 7' at the rear, and 8' at the front. o There are two entry points on the home side dugout. o There is to be a guard rail with a net in front of each dugout to protect players. It should be about 48" tall with black netting stretched inside, and padding around the pipe top and side posts. o The dugouts are to be constructed of cinder block with a sloped R-panel galvalume roof. o There is to be a 128' long, 36" tall, and 18" thick backstop wall along the front edge of the concrete sidewalk behind home plate. The wall can be constructed out of cinder block with cap stones along the top of the wall. See included pictures for basic examples. o Submitted proposal will include all necessary material, hardware, equipment, and labor to complete the project. Picture and Drawing Examples - The included drawing show the netting system that will be installed. The backstop must fit with and support the netting system.