Site work and paving for a mixed-use development in Eatonton, Georgia. Completed plans call for site work for a playground / park / athletic field; sidewalk / parking lot; for paving for a sidewalk / parking lot; and water / sewer project.

Briar Patch Trail Park Phase II Expansion Project No: 2025-47PRJ The work to be performed consists of furnishing all labor and materials to complete the Briar Patch Trail Phase II. More specifically, the project will consist of installation of approximately 2,900 LF of multi-use trail and trail construction improvements including 1,700 S.Y. of crusher run trail, 1,300 S.Y. of pervious asphalt binder trail, a pedestrian bridge, trail signage, informational kiosks, benches, exercise stations, associated drainage improvements and other improvements typically included in a multi-use trail construction project. Document info : Plans, Specifications, and Contract documents are open to public inspection at the Eatonton City Hall, 201 North Jefferson Avenue, Eatonton, Georgia 31024 and Simonton Engineering, LLC, 1050 Parkside Commons, Suite 101, Greensboro, Georgia 30642. Each Contractor must prequalify for bid by submitting a completed "Statement of Bidder Qualifications" form supplied by the Engineer. Bids will be accepted from prequalified bidders only. Bids must be accompanied by a certified check or bid bond in an amount equal to at least five percent (5%) of total amount bid for the completed work. No bids may be withdrawn for a period of sixty (60) days after the closing time schedule for receipt of bids. The Owner reserves the right to accept or reject any or all bids and to waive informalities. Award of the contract, if it is awarded, will be to the lowest responsible bidder. NOTE: Plans and Specifications must be obtained no later than five (5) working days before the bid date. No exceptions. Question Deadline 08/14/2025 Neither Owner nor Engineer will be responsible for any oral instructions or interpretations of the Drawings and Specifications. Requests for interpretations of Drawings and Specifications must be made in writing to the Engineer no later than seven (7) days prior to date set for receipt of bids.