Renovation of a golf course in Midland, Texas. Completed plans call for the renovation of a golf course.

If the Contract is awarded, it will be awarded to either the lowest responsible bidder, or to the bidder who provides goods or services at the best value for the City of Midland. In determining the best value for the City of Midland, the City of Midland may consider the criteria enumerated in Section 252.043 of the Texas Local Government Code. Question Deadline 08/22/2025 at 12:00 PM CT All questions shall be directed to Trey Kemp OBJECTIVE/SCOPE A. The objective of these specifications is to provide an irrigation system, which will effectively irrigate all areas to be covered and shall be installed in a professional, workmanlike manner. The specifications, design details, and irrigation drawings are to be considered part of the Contract and the Contractor shall follow the specifications with due perseverance. The work contemplated by the specifications consists of the provisions of labor, material, equipment and services required for all work as described herein. Unless otherwise specified, the plans and specifications are intended to include everything obviously prerequisite and necessary for the proper installation and completion of the work whether each necessary item is mentioned herein or not. B. The plans and specifications are intended to be cooperative and any item called for in one and not the other shall be as binding as if called for in both. If a discrepancy exists between an item called for in the plan and the specifications, the plan takes precedence. C. All work specified herein or called for on the drawings will be executed in accordance with all governing ordinances, laws and regulations that meet all local conditions. If the Contractor performs any work contrary to such codes, laws or regulations, they shall assume full responsibility and bear all costs necessary to correct the work, without additional cost to the Owner. D. The contractor shall abide by, and comply with the true intent and meaning of the drawings and specifications taken as a whole of any manifest error or omission, should any exist. Figured dimensions of the drawing shall take precedence over measurements by scale