Renovation of a detention facility in Brooksville, Florida. Completed plans call for the renovation of a detention facility.

This work includes the provision oflabor, material, equipment, supervision and administration to integrate the work outlined in these specifications into the total building system such that no leakage into the system occurs. In general, the scope of work in the Base Bid includes: 1. Low Slope Roof Replacement - Roof Areas All: a. Remove and dispose ofthe roof system including flashings and sheet metal down to the lightweight concrete deck. b. Fully adhere felt-back thermoplastic single ply membrane along with flashings and accessories. c. Replace sheet metal flashings and trim. d. Provide a complete, watertight, 20-year warrantable roof assembly. F. Provide electrical, plumbing, mechanical, and other related trade work necessary tofacilitate project operations. Relocate or raise conduit, HVAC equipment, curbs, and/or plumbing necessary to comply with the requirements of these documents and conform to the requirements of the State Building Code. 1. Conduct construction operations so thatheat,air conditioning, ventilation, electrical, telephone, gas, water, sanitary, storm sewer, and any other service required for the building operations are maintained at all times during normal working hours. Any shutdowns or interruptions shall be coordinated with and approved by the owner General requirements and specific recommendations of the material manufacturers are included as part of these specifications. The manufacturers' specifications are the minimum standards required for the completed systems. Where specific items listed herein improve the standards required by the manufacturers, they take precedence where their compliance does not affect the manufacturers' guarantee or warranty provisions. H. Act as the Project Expeditor and coordinate work and schedules of others hired. Question Deadline 08/25/2025 at 5:00 PM ET Engineer's written interpretation or clarification per the provisions described in the Contract Documents.