This is a service / maintenance or supply contract in Compton, California. Contact the soliciting agency for additional information.

The City of Compton solicits Requests for Proposals (RFP) from experienced contractors and firms to provide expertise and professional services in performing Citywide Sidewalk Repairs and Replacement. For general and technical inquiries, please contact the Interim Street Superintendent, Marcus Harris at 310-605-5691 or mharris@comptoncity.org. The City of Compton Public Works Street Maintenance Department is seeking Request for Proposals (RFPs) from qualified contractors for sidewalk repairs and replacement projects throughout the City. This initiative aims to address deficient sidewalks and eliminate trip and fall hazards. The project will include the assessment, repair and replacement of sidewalks, driveway approaches, Americans with Disabilities Act (ADA) ramps, curbs and gutters to ensure safety, accessibility and compliance with current ADA standards. The selected contractor will be responsible for repairing or replacing deteriorated, cracked or hazardous sidewalks throughout the City. Work will include, but not limited to: Removal of Existing Sidewalks, Driveway Approaches, Ramps, Curbs and Gutters: Removing old, damaged or hazardous sections of sidewalks, driveway approaches, ramps, curbs and gutters. Any damage by the Contractor to adjacent curbs, sidewalks, lawn areas, shrubs, etc., must be repaired or replaced by the Contractor at its own expense, as nearly as practical to their original condition, to the satisfaction of the City. Concrete Repair and Replacement: Pouring new concrete, ensuring proper leveling and addressing any drainage issues. Float Finish: Do not add water to concrete surfaces during finishing operations. Begin the second floating operation when bleed-water sheen has disappeared and concrete surface has stiffened sufficiently to permit operations. Float surface with power-driven floats, or by hand floating if area is small or inaccessible to power units. Finish surfaces to true planes. Cut down high spots and fill low spots. Refloat surface immediately to uniform granular texture. Burlap Finish for Sidewalks and Walk Areas: Drag a seamless strip of damp burlap across float-finished concrete, perpendicular to line of traffic, to provide a uniform, gritty texture. Medium-to-Fine Textures Broom Finish for Parking and Drive Areas: Draw a soft bristle broom across float-finished concrete surface perpendicular to line of traffic to provide a uniform, fine-line texture. o Site Preparation: Excavation, grading and any necessary foundation work. Compliance: Ensuring all work complies with ADA guidelines, local codes and regulations. A mandatory pre-proposal meeting is not required for this project. The term of the initial agreement shall be for a period of three (3) years, tentatively commencing October 1, 2025 through September 30, 2028, with two (2) one-year optional extensions. The City will retain the option, at its sole discretion to extend the agreement. The City also reserves the right to terminate the contract at any time. Recommend Award to City Council September 23, 2025 This RFP does not commit the City to award a contract, pay any cost incurred in the preparation of a proposal in response to this RFP or to procure or contract for services. The City intends to award a contract(s) on the basis ofthe best interest and advantage to the City and reserves the right to accept or reject any or all proposals received as a result of this RFP, to negotiate with any or all qualified proposers or to cancel this RFP in part or in its entirety, if it is in the best interest of the City to do so.