Site work and new construction of a municipal facility in Friendship, New York. Completed plans call for the construction of a municipal facility; and for site work for a municipal facility.

The Electrical Contractor shall be responsible for all work shown on Electrical (E) and Technology (T) Drawings unless noted otherwise, and any electrical work shown on all other drawings and further defined below: 1. Division 08 - Openings: a. Specification Section 08 71 00 - Door Hardware including but not limited to: 1) Fire Alarm connection at all electrically operated hardware. 2) Provide power to all electrically operated hardware. 2. Division 10 - Specialties: a. Specification Section 10 28 00 - Toilet, Bath, and Laundry Accessories: 1) Provide power and final connections to all electrically operated Toilet, Bath, and Laundry Accessories. 3. Division 12 - Furnishings: a. Specification Section 12 24 00 - Window Shades 1) Provide power and final connections to all electrically operated shades. 4. Division 21 - Fire Suppression a. Specification Section 21 13 00 - Fire-Suppression Sprinkler Systems including but not limited to: 1) Provide interface between Fire Suppression and Fire Alarm System; Coordinate with Fire Suppression Contractor and test system completeness. 5. Division 22 - Plumbing: a. Specification Section 22 30 00 - Plumbing Equipment including but not limited to: 1) Provide power and electrical connections to Plumbing equipment. 6. Division 23 - Heating, Ventilating and Air-Conditioning (HVAC): a. Specification Section 23 21 23 - Hydronic Pumps including but not limited to: 1) Provide electrical connections to all Hydronic Pump equipment per manufacturers' requirements necessary for equipment to operate as intended. b. Specification Section 23 33 00 - Air Duct Accessories including but not limited to: 1) Provide electrical connections to all Air duct Accessories per manufacturers' requirements necessary for equipment to operate as intended. c. Specification Section 23 34 23 - HVAC Power Ventilators including but not limited to: 1) Provide electrical connections to all HVAC Power Ventilator equipment per manufacturers' requirements necessary for equipment to operate as intended. d. Specification Section 23 63 13 - Air Cooled Refrigerant Condensers including but not limited to: 1) Provide electrical connections to all Air Cooled Refrigerant Condensers equipment per manufacturers' requirements necessary for equipment to operate as intended. 7. Provide complete the work of Division 26 - Electrical a. Specification Section 26 56 00 - Exterior Lighting: 1) General Trades Contractor shall provide excavations, aggregate base, and backfilling for precast concrete light pole bases. 8. Provide the complete work of Division 27 - Communications. 9. Provide the complete work of Division 28 - Electronic Safety and Security. B. Furnish and install all labor, material, supervision, equipment, scaffolding, layout, engineering, deliveries, trucking, hoisting, rigging, shop drawings, submittals, and all other items related and required to complete all Electrical Work in accordance with the Contract Documents and all applicable codes having jurisdiction. C. The Contractor represents they have expertise in the performance of Work for this trade and assures all items to be complete, functional and installed in accordance with the best practices consistent with premium quality material and workmanship. D. The Contractor shall provide Installer Certification as part of the descoping process as outlined in the Submittals portion of Section 27 10 05 - Communications Copper Cabling. E. The Contractor shall provide Installer Certification as part of the descoping process as outlined in the Submittals portion of Section 27 15 23 - Communications Optical Fiber Cabling. All questions prior to bid opening must be received by the close of business on September 10, 2025. Questions shall be directed to Michael Saglibene at Hunt Engineers, Architects, Land Surveyors & Landscape Architect, DPC at email saglibenem@hunt-eas.com. All bidders request for information shall use the form located in specification 00 12 00 - Request for Information. A digital copy of this form is available upon request. As bid security, each Bid shall be accompanied by a certified check or Bid Bond made payable to Owner, in accordance with the amounts and terms described in the INSTRUCTIONS TO BIDDERS. The Owner requires that all bids shall comply with the bidding requirements specified in the INSTRUCTIONS TO BIDDERS. The Owner may, at their discretion, waive informalities in bids, but is not obligated to do so, nor does this represent that they will do so. The Owner also reserves the right to reject any and all bids. Under no circumstances will the Owner waive any informality which, by such waiver, would give one Bidder a substantial advantage or benefit not enjoyed by all other Bidders. No Bidder may withdraw their Bid before forty-five (45) days after the actual date of the opening thereof, unless a mistake due to error is claimed by the Bidder in accordance with INSTRUCTIONS TO BIDDERS. Attention of Bidders is particularly called to requirements as to conditions of employment to be observed and minimum wage rates to be paid under the Contract. Bidders must comply with Section 220-I of NYS Labor Law, and provide Certificate of Registration as a part of their bid. Bid Document Notes : Bid Documents may be obtained from the document distributor: Dataflow, Inc. via their designated web portal: online Office: 210 W. Gray Street, Elmira, NY 14901, phone (607) 734-8955 or (607) 772-2001 or BidSupport@goDataflow.com. Ordering from this web portal automatically places the prospective bidder on the plan holders' list. This designated web portal will be updated periodically with addenda, lists of registered plan holders, reports, and other information relevant to submitting a bid for the project. All official notifications, addenda, and other bidding documents will be offered through the designated web portal with notifications to registered bidders. Neither the Owner, Construction Manager, Architect/Engineer, nor Dataflow, Inc., as applicable will be responsible for bidding documents, including addenda, if any, that are obtained from sources other than the designated web portal. Refunds for printed sets will be made by Dataflow directly to the credit card provided by the bidder. Refunds for payment of one (1) copy of the printed sets will be made to those submitting bids on the forms furnished, if the printed set is returned in good condition to Dataflow within 30 days from the award of the contract or rejection of bids. Any non-bidder may be refunded their deposit only upon returning printed set PRIOR to bid opening The project value listed reflects the total project estimate.